MPC2KxL

Is it possible to start up my mpc 2000xl
with the pads already assigned to my favorite kit?

LET ME KNOW ( :

Manual, Chapter 10 - Disk Operation.. (Page 153)

If you don't have a manual and don't know where to get it, click here!

Place files you want to auto load in the root folder of your media.

@ Phulk - Thanks
i did look it but im still a little confused
maybe im reading the wrong thing

158-Chapter 10
4-4. Saving a Program & Sounds
^ is tthat the section

Save .APS with sounds in the root folder of your media (Floppy/Zip/CF/HDD), then take a look at Disk Operation/Overview/"SETTING UP the Primary Device". Follow these three steps.. In my english manual it is described on page 153,
in my german one this function isn't available (older software?!).

When you go to Load or Save screen, do you have "Setup" on F4? If not, you will maybe need to update your OS.

What's your native language?

@Phulk
English
-----------
MPC OS: 1.14
I googled MPC 2kxL OWNERS MANUAL PDF FILE
Thats what im using to look this up
Maybe you can just tell me what page in there
I really appreciate your help PHULK

This is the english manual I have.. Page 153, or PDF document page 165.

1 Hold down SHIFT and press LOAD (3 on the numeric kaypad) followed by SETUP [F4]. The following SETUP screen will appear.

***

2 Select the primary device in the Primary device: field. This selects the device that becomes active when the MPC2000XL is turned on. The avaiable options are FLOPPY, SCSI-0 ~ SCSI-7 and F-ROM.

3 Move the cursor to the Auto loading file type: field and select the type of file you want to load. This selects the type of file that is automatically loaded from the device selected above when the MPC2000XL is turned on.
The available options are, APS+ALL, ALL, APS, and OFF (refer to the subsequent explanation of file types). The MPC2000XL will load the first APS and/or ALL file found automatically.

@Phulk- Thanks Man !