By MPC2K500
Fri Apr 22, 2011 12:24 am
Bug Fixes & Addition: MPC2500 OS-XL Ver2.18 22-APR-2011
----------------------------------------------------------------------
1. [MAIN]
The screen of an audio track is strange.
2. [MIDI/SYNC]
MMC ALL is not memorized.
3. [INST PROGRAM]
[FILTER]
When a filter 2 is LINK, cursor cannot be moved to ADSR Depth.
4. [INST PROGRAM]
"ALL" of SHIFT+F6 in NON-OVERLAP mode is not displayed.
5. [MIDI TRACK]
If the ERASE button is pushed at the time of OVER DUB, all the events will be deleted.
6. The value of duration is sometimes strange.
<<Change>>
1. The maximum of duration was increased from 9999 to 65000. (170 bars 4/4)
It is not possible to increase more than this.
2. The track change by F1+PAD was changed into Q2 AFTER+PAD.
3. Specification change of loop hold playback of a sample
The loop hold playback by PAD BANK+PAD was abolished.
The same work is carried out by setting PLAY MODE of a program as LOOP&HOLD.
Refer to video.
Refer to manual.
4. [MAIN]
F1 button can open/close the window of "Timing Correct".
F2 button can open/close the window of "Click/Metronome".
<<Addition>>
1. Looping recorder mode addition. ([MODE]+PAD11)
This mode can carry out loop playback of the performance which you recorded immediately.
And an overdub can be carried out during loop playback.
Refer to manual.
2. [LOAD]
F5 (DELETE) button addition
3. [MIDI/SYNC]
[BUTTON]
Some buttons can be assigned to CC.
Refer to manual.
4. "REC" and "OVER DUB" were added to the foot switch.
----------------------------------------------------------------------
1. [MAIN]
The screen of an audio track is strange.
2. [MIDI/SYNC]
MMC ALL is not memorized.
3. [INST PROGRAM]
[FILTER]
When a filter 2 is LINK, cursor cannot be moved to ADSR Depth.
4. [INST PROGRAM]
"ALL" of SHIFT+F6 in NON-OVERLAP mode is not displayed.
5. [MIDI TRACK]
If the ERASE button is pushed at the time of OVER DUB, all the events will be deleted.
6. The value of duration is sometimes strange.
<<Change>>
1. The maximum of duration was increased from 9999 to 65000. (170 bars 4/4)
It is not possible to increase more than this.
2. The track change by F1+PAD was changed into Q2 AFTER+PAD.
3. Specification change of loop hold playback of a sample
The loop hold playback by PAD BANK+PAD was abolished.
The same work is carried out by setting PLAY MODE of a program as LOOP&HOLD.
Refer to video.
Refer to manual.
4. [MAIN]
F1 button can open/close the window of "Timing Correct".
F2 button can open/close the window of "Click/Metronome".
<<Addition>>
1. Looping recorder mode addition. ([MODE]+PAD11)
This mode can carry out loop playback of the performance which you recorded immediately.
And an overdub can be carried out during loop playback.
Refer to manual.
2. [LOAD]
F5 (DELETE) button addition
3. [MIDI/SYNC]
[BUTTON]
Some buttons can be assigned to CC.
Refer to manual.
4. "REC" and "OVER DUB" were added to the foot switch.