For discussion about setting up your studio and advice on the gear and equipment within it.
By biggamehit Wed May 18, 2011 10:59 pm
jonestown massacre wrote:
biggamehit wrote: I burned a cd the other day had sharp pulsating static all over it.




If it has a pattern to it, it def. isnt a ground hum (60 Hz). If it sounds kinda digital and jittery (the noise) it may be a crappy clock on the motherboard of your PC. HP Laptops were notorious for this (I had 3 dudes bring in their hp laptops into a music store I worked in, all had the same problem.)

If its a consistent hum, the think about grounding...You can test the circuit with one of these:

Image

The socket will be different in Japan, but they should have the same product. Lights tell you if there is, and what kind of fault is in your system.




Roger that...

I don't record into my PC or Mac which are plugged into A surge protector. Last time I tracked out I did it to my laptop as I did while in Iraq. There was some noise on the low but I was ok. I did try the plugging the Casio into another wall socket in another room still transmitted noise. I will try the battery route. Also in Japan, they use standard 110v sockets.. however the frequencies etc are not the same as the states..... atleast not off base, I will acquire that device to test though.

Yesterday I went to the store and came across a portable zoom mixer MRS-4 for 50 dollars. Its battery powered and was able to record some things. Came out much cleaner. Due to my monitors etc being plugged in, I could still here some noise when I scrolled with my mouse on the computer lol. So Now I feel good that its the house and not my equipment.

Thanks again bro's
By biggamehit Fri May 20, 2011 10:21 am
Figured it out after all the wire shooting... I cut the PC off and bam... no more Noise when recording to my battery powered zoom recorder. The plug in Zoom still has noise though even with the PC off. At least now I can record things.