
By psr
Tue May 31, 2011 10:35 pm
I recently had some issues with volume control with my MPC 5000 and my Moog Slim Phatty. The issue was that the volume would boost to max on the SP after sequences SP parts on MPC. None of my other synths reacted this way and I believe it was hit or miss at one point so I was stumped. i swapped cables. I toyed with settings on my interface, synths and mpc and eventually I figured since it only happens with the Slim that it must be the slim. So I sent back for repair and they (moog) found nothing wrong and hadnt encountered such a problem before so they upgraded the firmware to a yet unreleased version for the Slim. No change.
Then I contacted Akai and a cat named Sean responded with the remedy. Simple fix. not really a problem so much as it was an issue with me not realizing this setting needs to be changed (because it was never an issue before). None the less i feel like a goof for this whole mess. Anyways I thought maybe someone with similar issue may benefit from this so that's why im posting.
Sean Wrote...
"The Mixer of the MPC5000 is controlling volume levels of external MIDI devices. Navigate to Mode > Mixer (Pad 7). The levels you alter here will transmit to your external device." ~ Sean (Numark / Akai)
Done and done it works perfectly (although this is not a factor with my other synths it does affect SP so maybe others can benefit from my troubles).
Thanks Perry (Moog) & Sean (Akai Numark)
Thread from Moog forums
http://www.moogmusic.com/forum/viewtopi ... =7&t=10713
Then I contacted Akai and a cat named Sean responded with the remedy. Simple fix. not really a problem so much as it was an issue with me not realizing this setting needs to be changed (because it was never an issue before). None the less i feel like a goof for this whole mess. Anyways I thought maybe someone with similar issue may benefit from this so that's why im posting.
Sean Wrote...
"The Mixer of the MPC5000 is controlling volume levels of external MIDI devices. Navigate to Mode > Mixer (Pad 7). The levels you alter here will transmit to your external device." ~ Sean (Numark / Akai)
Done and done it works perfectly (although this is not a factor with my other synths it does affect SP so maybe others can benefit from my troubles).
Thanks Perry (Moog) & Sean (Akai Numark)
Thread from Moog forums
http://www.moogmusic.com/forum/viewtopi ... =7&t=10713
MOOG, JOBS, LINN, DILLA
http://www.BBoyTechReport.com
I sell Dope here
https://beatppl.com/collections/sample-packs
BeatPPL Podcast
https://www.youtube.com/watch?v=WL5OOcitArQ?list=PLFxOLZPGNErh1GcwxnvUarEXg8pDo31OO
http://www.BBoyTechReport.com
I sell Dope here
https://beatppl.com/collections/sample-packs
BeatPPL Podcast
https://www.youtube.com/watch?v=WL5OOcitArQ?list=PLFxOLZPGNErh1GcwxnvUarEXg8pDo31OO


