if this atrocity could become reality in my mpc, please let

37 posts

if this atrocity could become reality in my mpc, please let

By sally Sat Sep 10, 2011 4:48 pm

I would like to implement these 2 features.

being able to apply to many others, like these 2 screens, (by groups of 4 [Q-links 1-4]).
leaving less usable configuration parameters out of the q-link.

I'd like to see in each of the screens (displays) adjustment, the following:

two sliders and two knobs: equivalent to qlinks.

this same photo, but in the display of each adjustment

to see the parameter assignment and what is it. oh yeah, the buttons could be used to switch the selection function of the QLink.

another possible function to assign.

peace

crossings wrote:..that goes without saying... but someone needs to point out the obvious here.

HYBRIDHYBRID
HYBRIDHYBRID
*.*

CAN HARDWARE DO THIS TRACK?
C´MON!
PLAY TO THE END!!!

sally

Valued Member

Posts: 557

Joined: Thu Jan 13th, 2011

Location: ANY COORDINATE T.A.R.D.I.S

Re: if this atrocity could become reality in my mpc, please

By distortedtekno Sat Sep 10, 2011 11:46 pm

That would be a plus for 2500 owners.

distortedtekno

Moderator

Posts: 8870

Joined: Wed Jun 22nd, 2005

Location: New York

Re: if this atrocity could become reality in my mpc, please

By sally Sun Sep 11, 2011 12:38 am

distortedtekno wrote:That would be a plus for 2500 owners.

For 1000 owners it's easily too. ( for add 2 qlimks more )
Press hold After1 + press After2 = light buttons = 2 new qlinks to assign

For example...

Thanks for Your attention and peace.

Excarbes.

crossings wrote:..that goes without saying... but someone needs to point out the obvious here.

HYBRIDHYBRID
HYBRIDHYBRID
*.*

CAN HARDWARE DO THIS TRACK?
C´MON!
PLAY TO THE END!!!

sally

Valued Member

Posts: 557

Joined: Thu Jan 13th, 2011

Location: ANY COORDINATE T.A.R.D.I.S

Re: if this atrocity could become reality in my mpc, please

By sally Sun Sep 11, 2011 1:10 am

from now could I see one of these ?( +1)
Come on Ladies and gentlenmen!!!!!

peace and respect.

crossings wrote:..that goes without saying... but someone needs to point out the obvious here.

HYBRIDHYBRID
HYBRIDHYBRID
*.*

CAN HARDWARE DO THIS TRACK?
C´MON!
PLAY TO THE END!!!

sally

Valued Member

Posts: 557

Joined: Thu Jan 13th, 2011

Location: ANY COORDINATE T.A.R.D.I.S

Re: if this atrocity could become reality in my mpc, please

By cyrus Sun Sep 11, 2011 2:35 am

http://soundcloud.com/zeekzilla/lazerbeam
http://soundcloud.com/zeekzilla/randomjoint

cyrus

Expert Member

Posts: 3890

Joined: Wed Jan 14th, 2004

Re: if this atrocity could become reality in my mpc, please

By cyrus Sun Sep 11, 2011 2:41 am

along similar idea of more parameters assigned to qlinks.............I would also like to see the q3 and q4 knobs usable in trim mode to adjust the start and end points. q3 corresponding to start point and q4 corresponding to end point.

right now we just get to use q1 and q2 to adjust sample start and end,the problem with the slider is they are less smooth, so its harder to get accurate. the knobs are a bit smoother and could be more accurate (or atleast seem like they would be).

q3 = start point
q4 = end point
q1 = zoom in,zoom out
q2 = expand up, expand down

http://soundcloud.com/zeekzilla/lazerbeam
http://soundcloud.com/zeekzilla/randomjoint

cyrus

Expert Member

Posts: 3890

Joined: Wed Jan 14th, 2004

Re: if this atrocity could become reality in my mpc, please

By cyrus Sun Sep 11, 2011 2:48 am

id also like to see q1 be able to scroll through sample list "everywhere". right now you can use it to scroll through samples in pgm mode main screen. but as soon as you open window on the sample to see the sample list, you can no longer scroll.

basically anywhere you have to scroll through a list, id like to be able to use q1

http://soundcloud.com/zeekzilla/lazerbeam
http://soundcloud.com/zeekzilla/randomjoint

cyrus

Expert Member

Posts: 3890

Joined: Wed Jan 14th, 2004

Re: if this atrocity could become reality in my mpc, please

By cyrus Sun Sep 11, 2011 3:01 am

sally, what OS are you on?

I was exploring qlink more today and noticed that on osxl 2.30 there are some accesable slider options from the main screen under the track number. atleast a bit more accesable than having to go to slider mode.

http://soundcloud.com/zeekzilla/lazerbeam
http://soundcloud.com/zeekzilla/randomjoint

cyrus

Expert Member

Posts: 3890

Joined: Wed Jan 14th, 2004

Re: if this atrocity could become reality in my mpc, please

By cyrus Sun Sep 11, 2011 3:05 am

I definately think qlinks are under used. even if we dont get to pick what to use them for in each window or mode, each knob should atleast have some kind of default rather than just sitting there doing nothing. 4 qlinks on the mpc2500 take up a quarter size of the mpc, and are major hardware features that should be used..........whats the point of them being there if they go unused?

http://soundcloud.com/zeekzilla/lazerbeam
http://soundcloud.com/zeekzilla/randomjoint

cyrus

Expert Member

Posts: 3890

Joined: Wed Jan 14th, 2004

Re: if this atrocity could become reality in my mpc, please

By crossings Sun Sep 11, 2011 4:23 am

i'm extremely guilty of rarely using the Q-Links on any of my MPCs... :oops:

crossings

Expert Member

Posts: 5879

Joined: Sun Oct 28th, 2007

Re: if this atrocity could become reality in my mpc, please

By sally Sun Sep 11, 2011 9:33 am

cyrus wrote:+1

thank you very much !
the idea is making solid !

cyrus wrote:sally, what OS are you on?

This photos are many differents OS.
I can say os2 sure ( one bar edit screnn GRID),
and xl (14) I don't remember now, sorry .

And peace...

crossings wrote:..that goes without saying... but someone needs to point out the obvious here.

HYBRIDHYBRID
HYBRIDHYBRID
*.*

CAN HARDWARE DO THIS TRACK?
C´MON!
PLAY TO THE END!!!

sally

Valued Member

Posts: 557

Joined: Thu Jan 13th, 2011

Location: ANY COORDINATE T.A.R.D.I.S

Re: if this atrocity could become reality in my mpc, please

By sally Sun Sep 11, 2011 9:58 am

cyrus wrote:id also like to see q1 be able to scroll through sample list

Yes, for all thems .

Sample list
Program list
Track list
Sequence list
Fx list
Memorized setup list
Pattern list
With Q2 next seq select

Could be select in load/save or not? I don't know.

Peace.

crossings wrote:..that goes without saying... but someone needs to point out the obvious here.

HYBRIDHYBRID
HYBRIDHYBRID
*.*

CAN HARDWARE DO THIS TRACK?
C´MON!
PLAY TO THE END!!!

sally

Valued Member

Posts: 557

Joined: Thu Jan 13th, 2011

Location: ANY COORDINATE T.A.R.D.I.S

Re: if this atrocity could become reality in my mpc, please

By sally Sun Sep 11, 2011 2:49 pm

sally wrote:
distortedtekno wrote:That would be a plus for 2500 owners.

For 1000 owners it's easily too. ( for add 2 qlimks more )
Press hold After1 + press After2 = light buttons = 2 new qlinks to assign

For example...

Thanks for Your attention and peace.

Excarbes.

For 2500 owners :
For add again new qlinks. ( more than twenty, new assignement qlinks )

Press hold after1 + after2 = 4 new qlinks ( with 2 buttons light Q1 and Q2)
+ Add 4 new qlinks = press hold after2 + after3.
+ add 4 new qlinks = press hold after3 + after4.
+ add 4 = after4 + after1.
+ add 4 = after4 + aftetr2.
+ add 4 = after3 + after1.

per pad :lol: