possible to have different Delay time for each pad ?

Hello,

my question is:
can i programm the pads to send CCs when hit manually ?
to external gear and internal to control FX parameters.
in my case i need to control Delaytime.
I would like to have different FX settings depending on which Pad i hit. possible ?
Internal FX or external 19"FX. Both would be welcome.

jjos 3xl: Single CCs can be assigned to pads as well as strings of CCs in "pattern" form.

Hello,

Beware of that limitation:

Note
If the value of Time of DELAY is changed during a play, a noise will occur.
This is a limit of CPU which is not a bug.

http://www7a.biglobe.ne.jp/~mpc1000/os2xl/cc-fx3.htm

le rat wrote:Hello,

Beware of that limitation:

Note
If the value of Time of DELAY is changed during a play, a noise will occur.
This is a limit of CPU which is not a bug.

http://www7a.biglobe.ne.jp/~mpc1000/os2xl/cc-fx3.htm

ahh right,
so i have to use an external delay.
thanks guys

punkydoodle wrote:

le rat wrote:Hello,

Beware of that limitation:

Note
If the value of Time of DELAY is changed during a play, a noise will occur.
This is a limit of CPU which is not a bug.

http://www7a.biglobe.ne.jp/~mpc1000/os2xl/cc-fx3.htm

ahh right,
so i have to use an external delay.
thanks guys

I was just thinking about this.. it's not an original idea. But you can save a lot of money by syncing up to your DAW with MIDI and run as many outputs as you can to VST delay effects that are assigned to knobs and sliders of a MIDI controller.
It's worth experimenting with... something I gotta get around to trying.

distortedtekno wrote:But you can save a lot of money by syncing up to your DAW with MIDI and run as many outputs as you can to VST delay effects that are assigned to knobs and sliders of a MIDI controller.

i don't work with computers.
If i would, i would not need a MPC
I'm fine with one delay. i will use it as a resonator.
thanks

I couldn't find wether in the MPC nor found the page in the manual how to assign CC values to the pads.
Has somebody a tip or link where in the manual it is written, or in which programm page in the MPC i have to look ?
OS XL3

Thanks !

from XL2 Manual

MIDI CC/PC is outputted only on a main screen.

ahhh, another limitation.

would be cool to have a simply midi delay on the mpc...