For discussion about setting up your studio and advice on the gear and equipment within it.

By J.O.BEATS Thu Dec 15, 2011 2:59 am
Image

I pieced this together all from Ikea. Spent less then $200
User avatar
By distortedtekno Thu Dec 15, 2011 3:11 pm
Lampdog wrote:Image

This is what I bought, GREAT desk!

http://www.amazon.com/Studio-RTA-Creati ... B003LS3Q04

Have my 1 rackspace power conditioner and 1 rackspace RME in there. Dual 17inch monitors on top, perfect, what I always wanted.

desktop rackspace :shock: That is if you don't plan on going mobile.

It's the cheaper version of this
http://www.amazon.com/Studio-RTA-Produc ... 06-1031638

Image


Lamp, I got the Creation Station too. Had mine since 2003. The only negative I have about it is there's no keyboard draw and the height of the desk surface is too low to install one without getting a few leg injuries. Other than that, it's cool with a small wireless keyboard. I don't have any more rack units. I once had an s950, s2000, and s2800 in there at once. Now I just have 2 Furman power conditioners and my old Sony Minidisc deck w/rackmount kit (circa 1997) in there to take up the empty space, since I don't rack my amp in there anymore to keep the fan noise from disturbing me.

Ryan, sorry I didn't call you on the week of Thanksgiving. I was having some relationship problems with my girl and needed to sort all that out with her. But anyway if you're still in the area, let me know. I gotta show you the new crib (been here for 3 years, but changed the entire studio recently). The Creation Station Lamp and I got will be perfect for any MPC. You'll still have room for a synth or small MIDI controller, as well as computer mouse and keyboard. I can't fit my MPC on there with my Axiom 49. But it's ok since the 1000 is to my right on a Mix-400 stand. I'm just glad I'm still able to fit the x0xb0x on the desk. That's the only hardware synth I have now after selling everything for a Mac. But it's cool cause I can still roll with 2 different workflow methods comfortably... MPC, x0xb0x, and turntables are off to the right of me, laid out comfortably to rock it old school.... and of course the Mac Mini, Axiom 49, and Scarlett 2i2 interface right in front of me for when I'm working with Reason 6 (and soon enough Logic Pro 9 after the holidays are over).
I keep my speakers on their stands, so that I can keep the Mac Mini, 20" monitor, interface. mic and headphones up there sitting comfortably within reach. After 16 years, I've learned how to make it all as efficient as possible concerning workflow, ergonomics, and gaining back some valuable space in the living room. So the way it's all laid out was carefully planned to comfortably suit any home studio project. If I wanna record with my guitar and have my brother or any of my friends bring their guitars along, there's enough room for that as well without any collisions or getting tangled up in wires. You gotta come over soon. I can post pics, but it would be better for you to get a feel for the studio and this desk if you're looking to buy one.
User avatar
By Lampdog Thu Dec 15, 2011 6:24 pm
distortedtekno wrote:After 16 years, I've learned how to make it all as efficient as possible

+1
User avatar
By JUKE 179r Thu Dec 15, 2011 7:39 pm
DPM wrote:i saw a video of Imogen Heap's studio, and she had a few keyboards, a monitor, and a couple other things sitting inside a piano that had been stripped and she was using it as a "desk"

i think i remember her saying she used it during her live shows. it looked sick


here it is : http://www.musicradar.com/news/guitars/in-pictures-imogen-heaps-amazing-home-studio-225425/3

PICTURE #3


I thought that piano idea was pretty cool until I saw the her whole studio setup... DAMN!!!

Image
User avatar
By 3001 Fri Dec 16, 2011 3:53 pm
All good, I had pretty much a full schedule anyway. I'll be around next week for a bit. though I gotta move. I'll hit you up. I wanna peep that desk, see if the 60 will fit on it proper, wit h the evolver keyboard I'm picking up today. I want to cop it at the end of the motnh so when I move for Jan 1st, I'll be able to set up proper from the get go.

I'm hoping I can fit an mpc60, mpc500 and evolver keyboard on the front space, mixer on the top, and racks in the...well rack.

how's the quality of the wood? i cheked out some stuff @ stables that was cheap and when i thwaped the desk it seemed to make a bad sound...

distortedtekno wrote:
Lampdog wrote:Image

This is what I bought, GREAT desk!

http://www.amazon.com/Studio-RTA-Creati ... B003LS3Q04

Have my 1 rackspace power conditioner and 1 rackspace RME in there. Dual 17inch monitors on top, perfect, what I always wanted.

desktop rackspace :shock: That is if you don't plan on going mobile.

It's the cheaper version of this
http://www.amazon.com/Studio-RTA-Produc ... 06-1031638

Image


Lamp, I got the Creation Station too. Had mine since 2003. The only negative I have about it is there's no keyboard draw and the height of the desk surface is too low to install one without getting a few leg injuries. Other than that, it's cool with a small wireless keyboard. I don't have any more rack units. I once had an s950, s2000, and s2800 in there at once. Now I just have 2 Furman power conditioners and my old Sony Minidisc deck w/rackmount kit (circa 1997) in there to take up the empty space, since I don't rack my amp in there anymore to keep the fan noise from disturbing me.

Ryan, sorry I didn't call you on the week of Thanksgiving. I was having some relationship problems with my girl and needed to sort all that out with her. But anyway if you're still in the area, let me know. I gotta show you the new crib (been here for 3 years, but changed the entire studio recently). The Creation Station Lamp and I got will be perfect for any MPC. You'll still have room for a synth or small MIDI controller, as well as computer mouse and keyboard. I can't fit my MPC on there with my Axiom 49. But it's ok since the 1000 is to my right on a Mix-400 stand. I'm just glad I'm still able to fit the x0xb0x on the desk. That's the only hardware synth I have now after selling everything for a Mac. But it's cool cause I can still roll with 2 different workflow methods comfortably... MPC, x0xb0x, and turntables are off to the right of me, laid out comfortably to rock it old school.... and of course the Mac Mini, Axiom 49, and Scarlett 2i2 interface right in front of me for when I'm working with Reason 6 (and soon enough Logic Pro 9 after the holidays are over).
I keep my speakers on their stands, so that I can keep the Mac Mini, 20" monitor, interface. mic and headphones up there sitting comfortably within reach. After 16 years, I've learned how to make it all as efficient as possible concerning workflow, ergonomics, and gaining back some valuable space in the living room. So the way it's all laid out was carefully planned to comfortably suit any home studio project. If I wanna record with my guitar and have my brother or any of my friends bring their guitars along, there's enough room for that as well without any collisions or getting tangled up in wires. You gotta come over soon. I can post pics, but it would be better for you to get a feel for the studio and this desk if you're looking to buy one.



All good, I ddon
User avatar
By Lampdog Sat Dec 17, 2011 4:23 am
Image

From the floor to the normal workspace where you would put your mpc, it is 26 inches.

There are 4 one unit rackspaces on each side.

From extreme left to extreme right it is 59 1/2 inches long.
From the top of the normal workspace where you would put your mpc to the top of the rack where you would place your monitors is 11 inches (rack units will be within this 11 inches).

Top of the desk where you would put your monitors from extreme left to extreme right is 51 1/4 inches.

From front where you sit to the extreme backd against the wall is 29 inches.

I didn't measure the bottom black part.
User avatar
By distortedtekno Sat Dec 17, 2011 4:51 pm
Lampdog wrote:Image

From the floor to the normal workspace where you would put your mpc, it is 26 inches.

There are 4 one unit rackspaces on each side.

From extreme left to extreme right it is 59 1/2 inches long.
From the top of the normal workspace where you would put your mpc to the top of the rack where you would place your monitors is 11 inches (rack units will be within this 11 inches).

Top of the desk where you would put your monitors from extreme left to extreme right is 51 1/4 inches.

From front where you sit to the extreme backd against the wall is 29 inches.

I didn't measure the bottom black part.


I should know these measurements by heart. :lol:
I've moved this desk around to 4 different cribs since I bought it back in '03.
Something tells me you're like me when it comes down to rearranging a room... the tape measure and all the forethought of cable runs, outlet spaces, and everything else is all done first, then the move just comes together. :)
User avatar
By Lampdog Sat Dec 17, 2011 5:05 pm
yeah, I'm very particular about what goes where. I measure everything first. With cable I'll measure where I want the cable to run and for every 1ft I'll add 3 inches of excess cable. When I finally got desk I put my stuff together everything was perfectly arranged exactly how I wa0nted it. I need better cable management tactics though. That's on my list of things to do. I already know what needs to be done I just haven't did it yet.

But yeah, someone had asked for measurements so there it is.
I am curious about that QuNeo because I want a customizable touch control surface that isn't seriously big to control my daw. I really don't want to get an m-audio project mix cause I was looking at it but just looking. I don't need a control surface integrated into an audio interface, got an interface already. And I don't want the control surface to take up my whole desktop of the desk, I like to have room there to write notes and keyboard and stuff. I will never put my triton kydb or drum machine right on the desktop like most people I see in pictures.

I also have the mix-400 to hold my 4k, 2 tier keyboard tower as well.


viewtopic.php?f=11&t=111681&hilit=mpc+stand

ImageImage
User avatar
By distortedtekno Sat Dec 17, 2011 5:14 pm
3001 wrote:All good, I had pretty much a full schedule anyway. I'll be around next week for a bit. though I gotta move. I'll hit you up. I wanna peep that desk, see if the 60 will fit on it proper, wit h the evolver keyboard I'm picking up today. I want to cop it at the end of the motnh so when I move for Jan 1st, I'll be able to set up proper from the get go.

I'm hoping I can fit an mpc60, mpc500 and evolver keyboard on the front space, mixer on the top, and racks in the...well rack.

how's the quality of the wood? i cheked out some stuff @ stables that was cheap and when i thwaped the desk it seemed to make a bad sound...

distortedtekno wrote:
Lampdog wrote:Image

This is what I bought, GREAT desk!

http://www.amazon.com/Studio-RTA-Creati ... B003LS3Q04

Have my 1 rackspace power conditioner and 1 rackspace RME in there. Dual 17inch monitors on top, perfect, what I always wanted.

desktop rackspace :shock: That is if you don't plan on going mobile.

It's the cheaper version of this
http://www.amazon.com/Studio-RTA-Produc ... 06-1031638

Image


Lamp, I got the Creation Station too. Had mine since 2003. The only negative I have about it is there's no keyboard draw and the height of the desk surface is too low to install one without getting a few leg injuries. Other than that, it's cool with a small wireless keyboard. I don't have any more rack units. I once had an s950, s2000, and s2800 in there at once. Now I just have 2 Furman power conditioners and my old Sony Minidisc deck w/rackmount kit (circa 1997) in there to take up the empty space, since I don't rack my amp in there anymore to keep the fan noise from disturbing me.

Ryan, sorry I didn't call you on the week of Thanksgiving. I was having some relationship problems with my girl and needed to sort all that out with her. But anyway if you're still in the area, let me know. I gotta show you the new crib (been here for 3 years, but changed the entire studio recently). The Creation Station Lamp and I got will be perfect for any MPC. You'll still have room for a synth or small MIDI controller, as well as computer mouse and keyboard. I can't fit my MPC on there with my Axiom 49. But it's ok since the 1000 is to my right on a Mix-400 stand. I'm just glad I'm still able to fit the x0xb0x on the desk. That's the only hardware synth I have now after selling everything for a Mac. But it's cool cause I can still roll with 2 different workflow methods comfortably... MPC, x0xb0x, and turntables are off to the right of me, laid out comfortably to rock it old school.... and of course the Mac Mini, Axiom 49, and Scarlett 2i2 interface right in front of me for when I'm working with Reason 6 (and soon enough Logic Pro 9 after the holidays are over).
I keep my speakers on their stands, so that I can keep the Mac Mini, 20" monitor, interface. mic and headphones up there sitting comfortably within reach. After 16 years, I've learned how to make it all as efficient as possible concerning workflow, ergonomics, and gaining back some valuable space in the living room. So the way it's all laid out was carefully planned to comfortably suit any home studio project. If I wanna record with my guitar and have my brother or any of my friends bring their guitars along, there's enough room for that as well without any collisions or getting tangled up in wires. You gotta come over soon. I can post pics, but it would be better for you to get a feel for the studio and this desk if you're looking to buy one.



All good, I ddon


all that should fit well if it's a mono evolved keyboard. guess you miss the poly you had 6 years ago. i love that thing. i sold my desktop evolver. kinda wish i kept it. but the mac mini was worth it considering what I can do with thor.
but anyway, you should be able to fit the mpc60 right in the middle, evolver keyboard on the left, mpc500 on the right of the mpc60 and feel very comfortable. hell, if you're around, i'd say bring those 3 pieces over and set them up on my desk. it's not a problem for me to quickly move the axiom 49 and the x0xb0x out of the way to give it a try. then if you got time to chill, i'll fire up the 1000 and the x0xb0x, and sync up to your 60, 500, and evolver keyboard, have a jam and record it just for fun. i'll send you a pm to make sure your number is still the same, since i'm horrible with keeping in touch with my friends... my bad for that. i gotta stop doing that.
but anyway, to answer the question about the wood... this is MDF or something similar with woodgrain formica. it's heavy and its dense, and it's held up quite well for all the moves i've made with it and all the use I've got from it. :)
User avatar
By distortedtekno Sat Dec 17, 2011 5:32 pm
Yeah I'm the same with cable runs as well. Cable management was never something I bothered much with when I had tons of hardware, since I was always rewiring things all the time. Now my cables are very minimum and I don't have to worry about that anymore. lol

You hit the nail right on the head with the QuNeo. I'm curious for the same reasons. There's no space for anything with my Axiom 49 on the desk. My MPC is on a Mix 400 stand like you have. But I'd like a pad controller that's light and portable that I can place on my lap while using and then store it in the area where I have empty rack space, like I do with my wireless keyboard.

I still have a 3 tier onstage keyboard stand in the closet after selling all the gear I used it for. I gotta get rid of it and take back some closet space.

Lampdog wrote:yeah, I'm very particular about what goes where. I measure everything first. With cable I'll measure where I want the cable to run and for every 1ft I'll add 3 inches of excess cable. When I finally got desk I put my stuff together everything was perfectly arranged exactly how I wa0nted it. I need better cable management tactics though. That's on my list of things to do. I already know what needs to be done I just haven't did it yet.

But yeah, someone had asked for measurements so there it is.
I am curious about that QuNeo because I want a customizable touch control surface that isn't seriously big to control my daw. I really don't want to get an m-audio project mix cause I was looking at it but just looking. I don't need a control surface integrated into an audio interface, got an interface already. And I don't want the control surface to take up my whole desktop of the desk, I like to have room there to write notes and keyboard and stuff. I will never put my triton kydb or drum machine right on the desktop like most people I see in pictures.

I also have the mix-400 to hold my 4k, 2 tier keyboard tower as well.


viewtopic.php?f=11&t=111681&hilit=mpc+stand

ImageImage
User avatar
By Lampdog Sat Dec 17, 2011 5:40 pm
I hear you on space, my closet isn't full and I don't want it to get full, I need to throw away old gear boxes and sell off my digi001 although it's ancient still works but no one will want it, lol. I tend to keep boxes for 1 year just in case gear goes bad and I need to send it in for warranty repair, then I throw them away after that year warranty is over. Maybe I could just flatten them, there's a thought.
User avatar
By distortedtekno Sat Dec 17, 2011 8:06 pm
flattening them is good. it all depends on what you think you may sell in the future... like if you had a roland sh-101 with the original box, manuals, etc. from 1983, you'd fetch more money on a vintage piece of gear. same goes for samplers. i still got boxes from stuff i"ll probably just let sit in the closet (got a closet specifically for gear i"m not using like mic pre"s midi patch bays, guitar pedals, cables, etc. i grab what i need off the shelf and it keeps the clutter down in here. then of course i have another closet space just for boxes incase of warranty issues. i gotta clean that closet out too and start tossing boxes i won't need. i think my toaster oven and my computer monitor are definitely out of warranty. lol