All I Want (another FL Studio topic)

In FL Studio sometimes you get a v2 of a pluggin (ie: delay 2, parametric eq 2, reverb 2, etc...)


I think they should make a Wave Traveler 2!

finer zoom, or finer intervals than .250% ... right clicking the pitch knob could have more choices than 25%, 50%, 100%, 200%, etc.. (essentially more than just the doubling/halfing intervals) ... maintaining the quick and simple method though.. cause that is my favourite feature of the current one which is why I use it for 95% of my fl samples...


oh, and they should make more and better distortions other than the fast dist and squeeze.

mr_debauch wrote:In FL Studio sometimes you get a v2 of a pluggin (ie: delay 2, parametric eq 2, reverb 2, etc...)


I think they should make a Wave Traveler 2!

finer zoom, or finer intervals than .250% ... right clicking the pitch knob could have more choices than 25%, 50%, 100%, 200%, etc.. (essentially more than just the doubling/halfing intervals) ... maintaining the quick and simple method though.. cause that is my favourite feature of the current one which is why I use it for 95% of my fl samples...


oh, and they should make more and better distortions other than the fast dist and squeeze.

I never use it so that wont help me. Im still on FL Studio 8. They havent done anything major yet to make me want to update and move all my samples/packs. I just wish that it was more MPCish without being an MPC. I use it with my MPD, but the FPC still needs way more work. I hate that I cant timestretch and manipulate samples before/while there on an FPC. Also it needs 16 levels! I've learned to do everything I need to do though.

oh, if they had a time stretch set of knobs like the standard default sampler generator has that would be sweet... (though I wont use it really)

I personally dont use FPC and never bothered much with it to be honest...

I like wave traveler because it is light, simple, quick, and to the point.. plus you can set up a whole key range with it.... you can set it up for the mpd very easily. I think a hot key would be cool where you hold something like ctrl or alt and something (maybe something like alt+s) and when you push a key on the keyboard or mpd... it selects that key on the wave traveler (the pushed key turns orange)

im still on version 6

debauch, check out the blood overdrive, theres a switch there, it amps the signal 10.000% i also use the filter on there
(for example, if i want some extra harmonics on the kick of a break i sampled, i turn all the gains and preband too 100% (i think this is a dry/wet balance of the filter, before the overdrive), choose the frequency with 'color' (watch out for DC stuff), adjust gains and preband, mix in some of the original signal)

AntonPD wrote:im still on version 6

debauch, check out the blood overdrive, theres a switch there, it amps the signal 10.000% i also use the filter on there
(for example, if i want some extra harmonics on the kick of a break i sampled, i turn all the gains and preband too 100% (i think this is a dry/wet balance of the filter, before the overdrive), choose the frequency with 'color' (watch out for DC stuff), adjust gains and preband, mix in some of the original signal)

yeah it isn't bad.. if you have a decent system that can run a newer version like v9 ... it is worth it. So far version 10 doesn't include anything I am interested in... that would warrant me to bump up to that version... but 9 is highly worth getting.

Blood overdrive is okay.. I am not a huge fan of it but it works. If you like that, you might like the maximus that comes with v9.. it is a compressor/limiter/distortion/overdrive/3-band eq/gate/maximizer ... you can crank between such and such frequencies only.. and adjust those as well..

also, that convolver reverb is sweet... you can load up waveforms to capture the acoustics of an environment to re-apply that reverb on other things... but it comes with a good waveform by default... and it has an EQ tab that you can use to visually cut certain dampening properties or boost them sort of like a parametric eq. So that has a wet/dry knob which applies or removes it from the reverb... then there is a wet/dry knob for the reverb itself. It has a delay knob to set when the sound running through the reverb actually kicks in... which is a great effect to use sometimes. I use it as an EQ! hahaha.

the limiter that comes with version 9 is great too... it has compression abilities built in.. but the thing really makes it a breaze to mix and level your tracks. It has all the features you would expect from a limiter and more.

do you know if those plugins are vst or some fl studio onl format?

AntonPD wrote:do you know if those plugins are vst or some fl studio onl format?

im not sure if they are vst... maybe they are but something tells me they are the built in ones or... they dont come with individual installers.