recording into a master disk recorder!!!!

im having a problem! im trying to record digital audio from protools 10 into a alesis masterlink 9600 recorder, so i can keep it at 96k insted of going to 44.1k. the problem is im not getting any audio into the masterlink. its set at 96k, the input source is set to digital. if anybody can help, i need it..

so you are using SPDIF then? not audio cable right? If its digital in then its gotta be SPDIF

What kind of cables are you using btw? Also, what's connected to the interface?

im using spdif's. The interface im using is a motu ultralite.

im using balanced spdif cables.

Check your routing & settings in PT. Make sure things are bussed accordingly. If everything seems to be ok there, then take a look at your utility s/w for the ultralite.

It's usually something that's overlooked thus making things seem more than they are.

Oh, and make sure you're using 75 ohm coax cables instead of regular rca.

mr grillz wrote:im using balanced spdif cables.

I believe there is no such thing as a BALANCED SPDIF cables. Yeah you dont wnt to use RCAs at all. Toslink or 75 ohm coax as stated by dabmiester.
http://en.wikipedia.org/wiki/S/PDIF
thats the wiki on SPDIF, you should read that