Microkorg xl headphone jack

hi.
is it possible to connect the mk xl headphone jack with my mixer (line)
i have no more stereo slots left.

does it make sense to use the headphone jack or would u recomm. the stereo outs?

thank u very much
best
flash

if you only have 1 [mono] channel remaining on your mixer... then i would suggest running a mono cable from only one of the two stereo outputs [most commonly the left channel] into the mixer rather than trying to send stereo signal into a mono channel.

but in all honesty... just do whatever works with what you have available.

and the headphone out isn't a good idea ?

The Headphone out is usually an amplified/boosted signal. I would also recommend running one of the stereo outs (read on the back of your microkorg, one of the two stereo outs is labeled "mono") into your mixer channel.