MPC 1000 question

Why is it sometimes if i lay down my drums then come back to track my sample over top them it pretty much cuts the drums out? its not always but sometimes ive heard switchung my sample between mono to poly or vice versa did this and no better. Also is there anything i can do to cut down on the interfernce noise between my equipment all i am using is mpc-1000 ,numark TT-200 turntables a stanton smx 201 mixer a HP laptop and powered monitors but the noise is sometimes very loud Thanks

JayTee41282 wrote:Why is it sometimes if i lay down my drums then come back to track my sample over top them it pretty much cuts the drums out?

Are you using a different track for the sample or trying to record on the same track as your drums? You can have 64 tracks in a Sequence. If you are intending to put it all on one track, maybe you are hitting record when you should be using overdub.

I am changing tracks as i insert my samples

it cuts out the drum sound or over takes it whatever u wanna call it but bear in mind this is not always actually it may happen like 1 out of 50 times

Frequencies son, frequencies. Get to know them and learn the different uses and settings of Low, mid and high.

It doesn't matter if the sounds are on different tracks or just on one track. If your frequencies aint in harmony then it will be muddy and cancelling.

Best thing to do is to lower the samples and adjust from there. I love my samples up front but sometimes you have to compromise.