selecting multiple channels/functions

Hi.
Is there a way of selecting multiple channels in the mixer/fx sends or multiple functions like tune in the program settings so I can control all channels instead of having to do the same thing for each channel?
Thanks

In "Program" mode, select the desired column, for example "TUNE", hold SHIFT button then select "ALL" in the bottom options.

In 'mixer' mode (aka. Pad mixer) hold SHIFT and hit pads to select desired. This feature is from Akai OS so it's worth checking that manual for such features.

Yeah I knew you could select each pad but was wondering if there was a way of holding a button which selects all the channels without having to bang each pad

When I hold shift on the tune page the only option I get is to increase the tube by increments of 10

split692 wrote:When I hold shift on the tune page the only option I get is to increase the tube by increments of 10

Once the "ALL" option is pressed, let go of the SHIFT button if you want to change by increments of 1. You can also select decimals by pressing the right cursor.

SHIFT is like a like a fast increment function, same as in "Trim mode". If you trim a sample while holding SHIFT, the start/end will move faster.

Sorry to keep asking. My problem is I can't find an 'all' option anywhere

No problem, i am looking for the right words... english is not my first language.

When in "Program mode", put your cursor on "A01" in the "PAD" column. Then, scroll right with the cursor until you are in the "TUNE" column. Once there, press and hold "SHIFT" button: you will see the "OUT FX" option in the bottom of the screen change for "ALL". Press F6 to select it.

Note that you can do this when your cursor is on any row of any column, it doesn't have to be on "A01".

dont know what jjos you have but if you have jjos1 then

MODE - PAD 11 takes you to the larger program edit screen, in bottom left there is a ALL key.

Upon hitting this you will notice everything selected in the list highlights, you can pitch 64 samples up in one go or you can also assign them all filters, FX, outputs etc in one go.

Hope that helps.

Thanks for all the replies yeah makes sense. I only have the free jjos at the moment I gather that's the issue. Good to know for when I upgrade next week.
Thanks again