
By Blue Haze
Sun Apr 07, 2013 5:21 am
This is a small simulation of sidechaining on the 4k I came across from my logic and ableton experience using qlink sequence on the 4k.
Basically, first go to qlink setup and go to the part.
Next assign the program to the part 1, 2 or 3 etc.
Then setup the parameters like so
Part: 3
Assign: Amplitude @5i
Type:Replace l Q5 Slider is all the way down.
Range: -100>000 l
Ctrl:0 l
Midi:3A =
Now go into the Sequence page and turn on the q5 button.
It is important to set the Step: 1/16 as this seems to work fast enough with the automation you are going to program.
The sequence has 16 steps across the which represents a measure of 16 notes or steps as it should be called. The kick of a disco, house or dance track would hit on the 1,5,9 and 13 in one measure. What you want to do it set all of those sliders to zero but bring the 2, 6, 10 and 14 to the halfway or 3/4 mark according to your ears at the tempo you want to pump with your sequence`s tempo. Set all the other sliders at 100. You have to play around a bit by ear to get it how you want but you can have a lot of fun with you phrase loop.
Lastly remember to press the q-link sequence button on to heard the effect. You can go back to the setup page and automate the slider on a separate track to add more to your tracks. You can assign it to different parameters like filter, pan, pitch, attack you name it.
It isn`t as good as a full on compression within a daw or outboard gear but it can be a scratch pad of ideas until you track out your production or if you want to do live improvisation.
Back to the lab. 4k is sampler, sequencer, control surface with a synth matrix modulater have at it.
Basically, first go to qlink setup and go to the part.
Next assign the program to the part 1, 2 or 3 etc.
Then setup the parameters like so
Part: 3
Assign: Amplitude @5i
Type:Replace l Q5 Slider is all the way down.
Range: -100>000 l
Ctrl:0 l
Midi:3A =
Now go into the Sequence page and turn on the q5 button.
It is important to set the Step: 1/16 as this seems to work fast enough with the automation you are going to program.
The sequence has 16 steps across the which represents a measure of 16 notes or steps as it should be called. The kick of a disco, house or dance track would hit on the 1,5,9 and 13 in one measure. What you want to do it set all of those sliders to zero but bring the 2, 6, 10 and 14 to the halfway or 3/4 mark according to your ears at the tempo you want to pump with your sequence`s tempo. Set all the other sliders at 100. You have to play around a bit by ear to get it how you want but you can have a lot of fun with you phrase loop.
Lastly remember to press the q-link sequence button on to heard the effect. You can go back to the setup page and automate the slider on a separate track to add more to your tracks. You can assign it to different parameters like filter, pan, pitch, attack you name it.
It isn`t as good as a full on compression within a daw or outboard gear but it can be a scratch pad of ideas until you track out your production or if you want to do live improvisation.
Back to the lab. 4k is sampler, sequencer, control surface with a synth matrix modulater have at it.


Im a sucker for space strings and moody but melodic deepness!!! 
