Why doesnt the Ren work on USB 3.0?

all my other 2.0 or lower devices work! why not the Ren?? Its very unresponsive and is unusable.Can this be fixed in a future update? im just curious.

Works fine on my new iMac! No problems at all!

Same with my MacBook Pro.

Mid 2012/ OSX Lion/ 16GB Ram/ 2.6 Ghz/ i7 Quad Core.

I run a Win 7 64bit PC and I have my Ren attached to the USB 3.0 port w/o issue.

Mind you I did a complete clean reinstall of my OS before installing my Ren, but it works great.

Works perfectly fine on my 2007 iMac with 2 Ghz and 4 gig ram.

Works on an intel Quad win7 64 Bit pic

WEIRD! There was a thread about this before but got deleted.Im working on a brand new ADK system (specs are in my sig) i connected the ren to 1 of my 3 USB 3 ports,starts up fine but theres a 1 second delay when im in sample edit mode and its impossible to work like this so i went back to my USB 2.0 port.Could be the way ADK configured the comp but i guess ill live with it.

just tried again with a diff USB 3 port.Same deal! Everything has a 1 second delay including the tap tempo light,completely off but the beat plays perfect.Oh well,no time to figure this out.

What other devices are connected to your USB hubs?

Try reinstalling the Ren driver!

LabDog wrote:What other devices are connected to your USB hubs?

on the ren hub i got my korg microkey37 & my external drive! On my actual laptop i have my bluetooth transmitter on one of my USB 3 joints.

DJ Hellfire wrote:Try reinstalling the Ren driver!

I could try that! Everyone here has it workin on Mac's! Im using a PC so maybe that has sumthin to do with it.

optik415 wrote:

LabDog wrote:What other devices are connected to your USB hubs?

on the ren hub i got my korg microkey37 & my external drive! On my actual laptop i have my bluetooth transmitter on one of my USB 3 joints.

The most likely issue is that you've got more devices on the USB ports than what they can handle power wise. You may want to try pulling all the devices, then add them back one by one (starting with the Ren of course. Be sure to monitor the Ren's performance for any changes after each device it's added.

If you find that one of the 3 devices you mentioned introduces the latency once it's been reconnected, you'll likely need to assist the system by adding a compatible powered USB hub to that port to help carry the l load that device requires.

Whether it be the laptop ports or the Ren's port(s), it sounds like you may be putting more on the USB hub than what it can handle without a powered hub..

optik415 wrote:

DJ Hellfire wrote:Try reinstalling the Ren driver!

I could try that! Everyone here has it workin on Mac's! Im using a PC so maybe that has sumthin to do with it.

No issues here on Mac and window 7.

I have sound prolems through 3.0. Ren will become obsolete.