For discussion about setting up your studio and advice on the gear and equipment within it.
User avatar
By DSTR / deStar Sun Jun 02, 2013 7:37 pm
Hi,

Sorry for repeating this here, but I don't get satisfactory answers at the other places.

01_ As mentioned here: viewtopic.php?f=36&t=164585 , the On-Stage Mix400 ( http://www.proaudiostar.com/on-stage-mi ... stand.html ) and the QuikLok QL-400 ( http://www.bhphotovideo.com/c/product/1 ... Stand.html ) seem good for playing the MPC Renaissance standing live.

02_ To the people that have one of those, which one do you recommend?

03_ Because I want this to play my MPC Renaissance live, I wonder: is it stable enough? Does it wobble?

04_ The QuikLok spec sheet says: "[...] adjusts (vertically) from 14.5" to 21" [...]" This isn't high enough. Am I reading the specs wrong? I need at least 36" high. Anything else you recommend?

05_ I was thinking of buying a keyboard stand and a piece of plywood to put on top so the Renaissance AND the laptop could be side by side. But then I would also need something to raise the Renaissance a lot! What would you recommend for that?

Thanks!
User avatar
By Lampdog Mon Jun 03, 2013 3:47 pm
I've touched both. I have a Mix400. More sturdy solid feel. Cylindrical so you can rotate left - right while wheels are locked. You can also lock that left right movement. It can be raised to a pretty good height as well.

I and many others here have a keyboard stand with keyboard on bottom and mpc on top, I dont have a board under my mpc, my QuikLok QL-642 X-Style Double Brace Two-Tier Heavy Duty Keyboard Stand can handle my 4k just fine.

http://www.bing.com/shopping/quiklok-ql ... oard+stand

The top arms can be loosened and brought inwards in order to hold smaller machines (mpc 4000 smaller dimensions) then locked. Smaller than that, you might need a board there though.
User avatar
By DSTR / deStar Mon Jun 03, 2013 7:42 pm
Lampdog wrote:I've touched both. I have a Mix400. More sturdy solid feel. Cylindrical so you can rotate left - right while wheels are locked. You can also lock that left right movement. It can be raised to a pretty good height as well.


Thanks! Great! What's the maximum height of the Mix400 if you don't mind my asking?

Lampdog wrote:I and many others here have a keyboard stand with keyboard on bottom and mpc on top, I dont have a board under my mpc, my QuikLok QL-642 X-Style Double Brace Two-Tier Heavy Duty Keyboard Stand can handle my 4k just fine.

http://www.bing.com/shopping/quiklok-ql ... oard+stand


The link doesn't work. Is that it? http://tinyurl.com/mw7vr36 If so... Is the maximum height 40-2/5"?

Lampdog wrote:The top arms can be loosened and brought inwards in order to hold smaller machines (mpc 4000 smaller dimensions) then locked. Smaller than that, you might need a board there though.


Seems perfect for the Renaissance! I could put the Ren on top, and my laptop on the bottom (if I have some kind of board, though...)

Thanks again!
User avatar
By Lampdog Tue Jun 04, 2013 7:54 am
krissserz wrote:The link doesn't work. Is that it? http://tinyurl.com/mw7vr36

Yep, that's my dual keyboard stand. Love it to death, very sturdy too.

krissserz wrote:What's the maximum height of the Mix400 if you don't mind my asking?

I don't know the max height, I never measured. Maybe it will say on the websites.
By Spinscott Wed Jun 12, 2013 2:16 pm
Looks like this was answered, but I will throw in my vote for the MIX-400 Stand! I have used for many mobile performances with the MPC5K, and it fits perfectly for live application. On it's smallest settings for width and depth, it also just fits the MPC1K. I assume the dimensions for the Ren are similar to the 5K, so you should be good :)
User avatar
By Metatron72 Wed Jun 12, 2013 2:28 pm
I'll third or fourth the recommends. The mixer joint with the adjusting holds all kinds of stuff I have, and I've got the 3 tier version of the keyboard rack here. Both are very nice and priced reasonably.
By Clint Sat Jun 22, 2013 11:00 pm
DSTR / deStar wrote:Sorry for repeating this here, but I don't get satisfactory answers at the other places


Are you sure now?

DSTR / deStar wrote:PS Shouldn't this thread be in "MPC Studio Environments" viewforum.php?f=11 ?


Are you sure now?

Got there in the end. :P