MPC Software v1.4 Bug Reports

The sends on my tracks are completely random and often the same knob I'm automating send 1 with will then start controlling send 4 or even the send on another track altogether.

Weird & very, very random.

Nubian Mindz wrote:The sends on my tracks are completely random and often the same knob I'm automating send 1 with will then start controlling send 4 or even the send on another track altogether.

Weird & very, very random.

Turned it on & off, restarted the project & the sends are still acting randomly.

Please fix this along with fx automation in 1.5 (or 1.41)

The PROG Mixer Automation GUI is broken

Ok one example again:

I have Created 3 Tracks, 3 new Programs (not copied) and draw in the following automation:

Track1 Program1: A01 Volume
Track2 Program2: NO Automation
Track3 Program3 A01 Panorama

Result:
Any Volume of any Programs PAD A01 is controlled with the automation data of:
Track1 Program1: A01 Volume

same with Track3 Program3 A01 Panorama:
Any Pan of any Programs PAD A01 is controlled with the automation data of:
Track3 Program3: A01 Volume

Even Track2 Program2 which contains no automation data has automated volume and pan.

see:
http://78.47.126.11/akai/AkaiProg.zip

This example should be obvious enough


see:
http://community.akaipro.com/akai_profe ... _behaviour

Dont know if this is a bug or just an isolated case but...

I can load midi files into the Ren,

but if I have a midi file that is very long, say 20 measures of midi notes, the Ren doesnt seem to load these larger/longer midi files. If I try to load a midi file that has a 2 or 4 bar sequence then everything is fine. But when I try to load a very big midi file it shows as if it loads to a sequence but there is no midi on any of the tracks. Could someone double check this for me? Try to load a very long midi file that's multiple times larger then your avergae midi file say, like a 32 measure midi file and tell me if it loads for you alright.

In 1.4 when I want to assign colors to my pads by pressing PAD ASSIGN. When I set my colors by pressing pads, the actual colors dont show up anymore till after I exit PAD ASSIGN. So for me to see the colors and make sure I assigned the right colors to the right pads I actually have to exit PAD ASSIGN mode to even see the pad colors, then I have to go back if I want to change. We used to be able to see the colors in PAD ASSIGN mode right when we pressed the pads, the lights would come on.

bug or no?

InspectahEX wrote:In 1.4 when I want to assign colors to my pads by pressing PAD ASSIGN. When I set my colors by pressing pads, the actual colors dont show up anymore till after I exit PAD ASSIGN. So for me to see the colors and make sure I assigned the right colors to the right pads I actually have to exit PAD ASSIGN mode to even see the pad colors, then I have to go back if I want to change. We used to be able to see the colors in PAD ASSIGN mode right when we pressed the pads, the lights would come on.

bug or no?

This is a bug as 1.1 functioned the way you described.

InspectahEX wrote:Dont know if this is a bug or just an isolated case but...

I can load midi files into the Ren,

but if I have a midi file that is very long, say 20 measures of midi notes, the Ren doesnt seem to load these larger/longer midi files. If I try to load a midi file that has a 2 or 4 bar sequence then everything is fine. But when I try to load a very big midi file it shows as if it loads to a sequence but there is no midi on any of the tracks. Could someone double check this for me? Try to load a very long midi file that's multiple times larger then your avergae midi file say, like a 32 measure midi file and tell me if it loads for you alright.

Can you email me the MIDI file you are having this issue with?

^Sent

AnSolas wrote:The PROG Mixer Automation GUI is broken

Ok one example again:

I have Created 3 Tracks, 3 new Programs (not copied) and draw in the following automation:

Track1 Program1: A01 Volume
Track2 Program2: NO Automation
Track3 Program3 A01 Panorama

Result:
Any Volume of any Programs PAD A01 is controlled with the automation data of:
Track1 Program1: A01 Volume

same with Track3 Program3 A01 Panorama:
Any Pan of any Programs PAD A01 is controlled with the automation data of:
Track3 Program3: A01 Volume

Even Track2 Program2 which contains no automation data has automated volume and pan.

see:
http://78.47.126.11/akai/AkaiProg.zip

This example should be obvious enough


see:
http://community.akaipro.com/akai_profe ... _behaviour

I confirmed this on my system. I also find it is only a visual bug in the Program Mixer.

Not sure if this has been mentioned in the thread. Mac OS X 10.7.x, MPC 1.4.
When double clicking on a project to open (with the stand alone MPC software NOT running), it only opens the app. You then have to double click on the project file again to actually open the project.

Also,
While running a project with one NI Kontact (5.0.3) plugin active, the MPC stand alone software always crashes upon quitting

Im still having issues with the REN scanning Motu BPM and UVI Workstation 32 bit. I have no issues with the 64bit but most of my plug ins are 32 bit and really would like to get this working since its suppose to. Ive uninstalled and reinstalled. removed the plug in and then but it back. Nothing worked. Here is my crash report....

I have
Windows 7 64 bit
I5 quad and 16GB ram

32 bit Reports....

Faulting application name: MPC.exe, version: 1.4.0.35, time stamp: 0x51c1b404
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
Exception code: 0xe06d7363
Fault offset: 0x0000c41f
Faulting process id: 0x1e0
Faulting application start time: 0x01ce9a00fa9b2823
Faulting application path: C:\Program Files (x86)\Akai Pro\MPC\MPC.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 7064f621-05f4-11e3-81ff-00270e0aac05


Fault bucket 3674041596, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: MPC.exe
P2: 1.4.0.35
P3: 51c1b404
P4: KERNELBASE.dll
P5: 6.1.7601.18015
P6: 50b83c8a
P7: e06d7363
P8: 0000c41f
P9:
P10:

Attached files:
C:\Users\Marcus\AppData\Local\Temp\WER921A.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\Marcus\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_MPC.exe_70345d9ab911829c64e4963d9dca2d5c1b58bc_1058c451

Analysis symbol:
Rechecking for solution: 0
Report Id: 7064f621-05f4-11e3-81ff-00270e0aac05

BDRAKE wrote:Im still having issues with the REN scanning Motu BPM and UVI Workstation 32 bit. I have no issues with the 64bit but most of my plug ins are 32 bit and really would like to get this working since its suppose to. Ive uninstalled and reinstalled. removed the plug in and then but it back. Nothing worked. Here is my crash report....

I have
Windows 7 64 bit
I5 quad and 16GB ram

32 bit Reports....

Faulting application name: MPC.exe, version: 1.4.0.35, time stamp: 0x51c1b404
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
Exception code: 0xe06d7363
Fault offset: 0x0000c41f
Faulting process id: 0x1e0
Faulting application start time: 0x01ce9a00fa9b2823
Faulting application path: C:\Program Files (x86)\Akai Pro\MPC\MPC.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 7064f621-05f4-11e3-81ff-00270e0aac05


Fault bucket 3674041596, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: MPC.exe
P2: 1.4.0.35
P3: 51c1b404
P4: KERNELBASE.dll
P5: 6.1.7601.18015
P6: 50b83c8a
P7: e06d7363
P8: 0000c41f
P9:
P10:

Attached files:
C:\Users\Marcus\AppData\Local\Temp\WER921A.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\Marcus\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_MPC.exe_70345d9ab911829c64e4963d9dca2d5c1b58bc_1058c451

Analysis symbol:
Rechecking for solution: 0
Report Id: 7064f621-05f4-11e3-81ff-00270e0aac05

1. When you enter Plugin Preferences, are you selecting [Rescan All], [Scan New] or both?

2. Does scanning this plugins produce a crash 100% of the time?

3. Does this happen with VST, AU, or both plugin types?

4. What software version of the Ren/Studio are you using?

JAH wrote:1. When you enter Plugin Preferences, are you selecting [Rescan All], [Scan New] or both?

2. Does scanning this plugins produce a crash 100% of the time?

3. Does this happen with VST, AU, or both plugin types?

4. What software version of the Ren/Studio are you using?

1. Ive done both and the outcome was the same

2. Yes %100 of the time

3. VST (I use Cubase)

4. Ren V 1.4

Oh and thanks you for helping

BDRAKE wrote:

JAH wrote:1. When you enter Plugin Preferences, are you selecting [Rescan All], [Scan New] or both?

2. Does scanning this plugins produce a crash 100% of the time?

3. Does this happen with VST, AU, or both plugin types?

4. What software version of the Ren/Studio are you using?

1. Ive done both and the outcome was the same

2. Yes %100 of the time

3. VST (I use Cubase)

4. Ren V 1.4

Oh and thanks you for helping

What versions of the Motu BPM and UVI Workstation are you using?

turnstile wrote:Not sure if this has been mentioned in the thread. Mac OS X 10.7.x, MPC 1.4.
When double clicking on a project to open (with the stand alone MPC software NOT running), it only opens the app. You then have to double click on the project file again to actually open the project.

This is a known issue since 1.0, that I believe happens on OSX only.

JAH wrote:What versions of the Motu BPM and UVI Workstation are you using?

BPM 1.5.2
I uninstalled UVI. I didn't use it often. But I believe it was the latest one.