Fader: "Tun" changes allways to "Trk" in main screen/seq mod

Hi,

MPC1K, JJOS2XL:
i´m in mainscreen/seq mode,
i jam with pads to find my sequence to play.
I also jam with Fader1, set to TUNE.
Now, that fader resetts allways to "TrK"

i don´t get it why this is.
I´ve not much donne in mainscreen/seq mode
but am quite shure i haven´t had that problem a few weeks back.
What could cause this behave ?
external gear is only midi clock, now ext. is off

the Q-link settings are now set in the program. Sowhen you go to a new track it will not be set to the program.
The midi clock has nothing to do with this at all. Unless you are using an external device to do programchanges on the MPC

Midi was just mentioned to say that i have no external midi control coming in, beeing a potential source of my problem.
can´t find any Q-link setting in "programm". ??

thanks. Problem still there though

No it's not a setting in the program window at all and if you read the manual you will find that the q-links are independent from it, but do get saved to the program's settings.
So for instance every program has its own Q-link setting that is saved. So make program's to save settings. If it says track then set it to pad but track does all pads on that track. There is pattern to pad to that can creat shortcuts to.
So Trk means that its set to effect all pads in track, unless you select a pad instead

Bliprock, thanks for the help,
but finally it seems that i wasn´t able to explain my problem good enough.
not native english myself its not allways easy to explain in english

i´v enot worked much in main window/ Sequenzer.
For now it seems that the behave i experienced is just normal behave of the 1K-JJOS2XL.
And it looks like its the dsplay only.
means , display and real behave is not behaving exactly the same, so i was fooled.
sorry, can´t explain it better in detail.

while i dived deeper into working with the sequenzer it seems to me,
that even OS2XL is still much of a roadworks.