By le rat
Thu May 01, 2014 9:31 am
MPC1000 hp :
MPC2500 hp :
---------------------------------------------------
Bug fixes: OS-XL Ver3.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [TRIM]
F5(CHOP)=> F6(EDIT)
Cursor is strange when a pad is struck in the mode of "Extract".
3. [GRID]
[Loop Edit]
[VIEW]
Even if it presses the STOP button, sound may not stop.
----------------------------------------------------
Bug fixes: 128XL Ver1.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
--------------------------------------------------
Bug fixes: OS3 Ver1.19 01-MAY-2014
--------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
MPC2500 hp :
----------------------------------------------------
Bug fixes: OS-XL Ver3.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [TRIM]
F5(CHOP)=> F6(EDIT)
Cursor is strange when a pad is struck in the mode of "Extract".
3. [GRID]
[Loop Edit]
[VIEW]
Even if it presses the STOP button, sound may not stop.
4. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
----------------------------------------------------
Bug fixes: 128XL Ver1.44 01-MAY-2014
----------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
3. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
--------------------------------------------------
Bug fixes: OS3 Ver1.19 01-MAY-2014
--------------------------------------------------
1. [Input thru]
When SYSTEM SETUPS set to ON from the state of OFF is loaded, "Input thru" does not work.
2. [SEQ EDIT]
F2(BARS) => INSERT
It is not possible to reduce the value of "Number of bars".
3. [MultiTimbre]
[Soft thru]
AS TRACK does not work other than NOTE.
