My MPC 2500 is pLaying pads simultaneously HELP!!. soft ver

I just bought this mpc 2500 on ebay, and after instaling the jjosxl pads are playing simultaneously also the get recorded at the same time. Is there any problem with the pads sensors? or its just a software function that can be disabled?
I'm just starting to read the jjosxl manual but the english it's a bit frustrating...
any help?

thanks

Problem solved. The MPC had some patterns settings on it, and in a way that was making the pads sound together, all good now
j

What do you mean just pattern settings???

I'm a XL user, so I'm getting to know the 2500 now. So I had installed the OSXL the pads where sounding simultaneously. In the main screen there is pattern settings at the top right I just open the pattern settings and saw many of the pads where hooked on top of each other, I just reset it,
But i must admit that I don't remember very well how I got to that pattern mode screen. at least the problem is solve dude..

Ok

**** im having this issue right now where the **** is that screen?!?!?!

Hi dude
I found it in the manual just go to the left in the main screen and hit window on SS:
and disable or delete the pads assignments.
here is a picture where you find the settings
http://wp.me/a4lcg6-2P

hope you get hand of it.
I still using my xl at the moment, so still new to the 25k
cheers

hm that's not what my screen looks like. I'm using jjos 3.1

oh I see, Im sure you find it.
I'm using jj osxl full paid version. but it shouldn't be that difficult, just dig into it...

you right.. im goin through the manual now. i can still make beats it's just annoying as ****.

good luck

OK so I ended up taking it apart cleaning the sensors and putting the grey pads back in (had the black ones) and it worked fine when I turned it on. Then when I put it back in the studio it was doing the problem even worse. The only difference was the power cable so I **** with that and what do you know it works perfect again. I don't know if the problem will come back or what was actually wrong.... but it's working now.

I'm glad your you.I think if the sensor or the power cable were causing that, you should starting looking at some new pads sensors http://www.mpcstuff.com/mpc-2500-pad-se ... nd-se.html

I have like 3 mpc's in case one fail me, I jump to the other one. I hope your problem never come back, keep hitting those pads

Yeah... I just ordered new sensors... Mine are not working at all now. I'm also stackin some paper for a 1000 or even a 2000xl or something for back up.

Thats the way it is bro if are serious about production must have at least three mpcs.

dude this is my soundclap channel, we can connect her aswell: https://soundcloud.com/soundclap-1

good luck
J