By MrJonJuddah
Wed Aug 27, 2014 3:01 am
OK .. Trying it now.
By MrJonJuddah
Wed Aug 27, 2014 3:06 am
OK .. It worked .. I kept the monitors unplugged .. and did nothing to the MAC .. It actually worked ..So on the MPC Software both Input & Output is now flowing via the Headphones ..
By MrJonJuddah
Wed Aug 27, 2014 3:16 am
Thank you all for your patience .. So this way I hear nothing in my monitors .. "But" I'm delighted to know I can hear directly from the MPC ...
In regards to the MAC .. these audio settings .. How should this be so I can also hear from my monitors .. ?
PS. I am not touching that MPC ... lol.
Thanx again.
In regards to the MAC .. these audio settings .. How should this be so I can also hear from my monitors .. ?
PS. I am not touching that MPC ... lol.
Thanx again.
By SimonInAustralia
Wed Aug 27, 2014 5:04 am
What audio inputs do the monitors have?
What make/model are they?
What make/model are they?
By MrJonJuddah
Wed Aug 27, 2014 11:39 pm
The model is RPM3
There's a 1/8 stereo jack and left and right input ports for 2 different types of cables .. as of now i do not have any cables to run into my Renaissance, so I'm assuming once I purchase the correct cables I will then run them out of the MPC and then IN to the RPM3 Monitors .. Am I right ?
There's a 1/8 stereo jack and left and right input ports for 2 different types of cables .. as of now i do not have any cables to run into my Renaissance, so I'm assuming once I purchase the correct cables I will then run them out of the MPC and then IN to the RPM3 Monitors .. Am I right ?
By SimonInAustralia
Thu Aug 28, 2014 12:03 am
If you connect the RPM3 to your computer via USB, then they can be set as the USB audio interface, which you would select in MPC Software preferences as your output audio device, and you would not have audio coming out of the Renaissance outputs.
You would probably be better off connecting them via the 1/4" audio inputs, or RCA audio inputs.
I would connect the Renaissance Stereo Out L/R 1/4" outputs to the RPM3 1/4" inputs.
The Renaissance has balanced 1/4" outputs.
I can not find any mention as to whether the RPM3 1/4" inputs are balanced or unbalanced.
If the RPM3 inputs are balanced, it might be best to use a balanced 1/4" TRS to TRS cable to connect them to the Renaissance Stereo Outs, but you can also use unbalanced 1/4" TS to TS cables.
If the RPM3 inputs are unbalanced, just use normal unbalanced 1/4" TS to TS cables to connect them to the Renaissance Stereo Outs.
You have quite a few different audio interface options, the Renaissance built-in audio interface, the EIE Pro, and the RPM3, and you can connect them and use them in different ways, how you do so is really up to you.
You would probably be better off connecting them via the 1/4" audio inputs, or RCA audio inputs.
I would connect the Renaissance Stereo Out L/R 1/4" outputs to the RPM3 1/4" inputs.
The Renaissance has balanced 1/4" outputs.
I can not find any mention as to whether the RPM3 1/4" inputs are balanced or unbalanced.
If the RPM3 inputs are balanced, it might be best to use a balanced 1/4" TRS to TRS cable to connect them to the Renaissance Stereo Outs, but you can also use unbalanced 1/4" TS to TS cables.
If the RPM3 inputs are unbalanced, just use normal unbalanced 1/4" TS to TS cables to connect them to the Renaissance Stereo Outs.
You have quite a few different audio interface options, the Renaissance built-in audio interface, the EIE Pro, and the RPM3, and you can connect them and use them in different ways, how you do so is really up to you.