And... Now the Blofeld and 2000xl

Hey guys

I found this text on how to get those two connected, but I JUST DONT GET IT

> On the MPC you will need to create a new track, select Program to "off" so
> you don't trigger internal MPC samples/sounds as well, and select Midi Out
> to the letter which port you used and a midi channel. eg A-1 (if the Blofeld
> is connected to the Midi Out A port of the MPC).

I'm lost here.. This part confuses me:

"and select Midi Out
> to the letter which port you used and a midi channel. eg A-1 (if the Blofeld
> is connected to the Midi Out A port of the MPC)"

Where do I do this? In the midi setup menu?

Damn, I may be dumb but can someone explain the parts that may be lost in translation?
Peace //B

on the main screen...

mr_debauch wrote:on the main screen...

Still get no midi signal to my Blofeld

Damn, I'm doing something wrong here

Lampdog wrote:Blowfeld has audio out.
Where is it routed?

It's routed to record in on the mpc.

Lampdog wrote:There is your problem.

Lampdog wrote:1. Record in on 2k.2kxl is ONLY active in the RECORD screen.

2. IRT to #1 - While on the 2k, 2kxl main screen, you will NOT hear the Blofeld if it's audio outs are plugged into the mpc record ins.

3. Mpc main out AND Blofeld main out -> mixer/audio interface.

Mixer/audio interface main out -> powered monitors or amp/receiver -> passive speakers.

Thank you, thought it was that simple.. :/