If you don't get an answer that you can use here soon, do a quick search here or at the digidesign user group ---http://www.digidesign.com/ ---- under support and Pro Tools LE Systems >> Pro Tools LE Systems on Mac OS: 002, 002R, 001, Mbox, AM3
Peace.
By homershines
Mon Dec 27, 2004 7:01 pm
By Logic718
Tue Dec 28, 2004 2:59 pm
FINESSE wrote:OK GUYS I'M TRYING TO SYNC UP MY 002 W/ MY MPC 3000 VIA MIDI.
I FOLLOWED ALL THE INSTRUCTIONS IN THE OO2 MANUEL. SET ALL THE SETTINGS RIGHT IN THE MPC. IT'S NOT WORKING. HOPING SOMEONE HAS SOME TIPS OR TRICKS.
THNX,
NESS
Make sure your midi cables are connected properly. Midi out of the 002 into midi input 1 of the MPC. IN PT, make sure that the MPC is chosen under beat clock in the midi options. Then in the 3000, go to "tempo/sync" select "syncscreen." Under syncscreen select MIDI Clock for mode. Then for "MIDI INPUT" select 1, since that's where you connected your midi cable to. IF you connected the 002 out to the mpc midi input 2, obviously change this selection. Also, make sure that Sync in is on. Lastly, make sure you disable the beat conductor and match the tempo to your sequence's tempo in the 3000. Press play in Pro Tools and it should trigger the MPC to play in sync.
Hope this helps
LOGIC