MPC & Nord

recently I bought an Nord lead 2 to and I set it to the following parameters local off midi for a,b,c,d are 11 12 13 14 respectively for both normal and performance mode so the problem I have is that when I press play on my mpc to start the sequence playback the Nord resets back to its default midi channel(1,2,3,4) for performance mode only.. Do you have any idea what's going on and how to fix it I look in the manual and couldn't find anything and I can't contact akai easily

panterajow wrote: I can't contact akai easily

Akai are not going to help you if you are using JJOS, it's not their software. Have you contacted Nord?

cant my phone wont let me I just need to know what kinda of messae the mpc play button is sending and why it resetting the channels

MPC-Tutor wrote:

panterajow wrote: I can't contact akai easily

Akai are not going to help you if you are using JJOS, it's not their software. Have you contacted Nord?

cant my phone wont let me call out of country I just need to know what kinda of message the mpc play button is sending and why it resetting the channels

The MPC sends a generic MMC Play start... this should not explicitly change anything..I would expect this is something happening on the Nord..
I sync and have synced many machines to my MPC (Yamaha's, DSI, Roland, Digitech........) and this is not an issue I have seen

Sounds like your performance settings are set to those midi channels? I run the lead 2x & have never had that issue?