1.9 Bug Reports

Add a sound to a pad or program. Set a pad or program to any Out 11-20 or Out 25-32 doesn't produce sound.
Happens on MAIN or PROG MIX screen

All the Outs seems to work just fine in plugin mode in Pro Tools 11.3.1

Expect: Sound to play on any Out set.
Actual: Only plays sound on Out 1-10 and 21-24

Windows 7 64-bit
MPC Software 64-bit

This is by design...
When in Standalone mode the outputs are directed to your physical soundcard outputs..
When in plug in mode the outputs are directed to the Daw...

dazastah wrote:Add a sound to a pad or program. Set a pad or program to any Out 11-20 or Out 25-32 doesn't produce sound.
Happens on MAIN or PROG MIX screen

All the Outs seems to work just fine in plugin mode in Pro Tools 11.3.1

Expect: Sound to play on any Out set.
Actual: Only plays sound on Out 1-10 and 21-24

Windows 7 64-bit
MPC Software 64-bit

This is by design...
When in Standalone mode the outputs are directed to your physical soundcard outputs..
When in plug in mode the outputs are directed to the Daw...

How is this by design? Why would it skip outputs that way? My physical soundcard (UA Apollo) doesn't have that many outputs. And when I'm in my Pro Tools I'm using the same physical sound card that I use with the MPC software so wouldn't it respond the same way if that was the case?

I thought those 32 outputs were virtual outputs. Did they change it?

Melodyne Editor 2.12 64 bit crashes during plugin scan.

Sometimes when I clear a track, the 'Clear Track' screen doesn't go away on the DAW. Is anybody else experiencing this from time to time?

Load the Maschine plugin on a track.
open the Maschine GUI.
Maschine's internal sequence is playing and won't stop although I never pressed play on the Ren.

expected results: Maschine's internal sequencer should start/stop in unison with the Ren
actual results: Maschine's internal sequencer plays and never stops.

This happens on both Windows 7 and Mac OS 10.11.1
It works fine in plugin mode.

instant mute stopped working when i installed 1.9. if i have a sample that is 4 bars long and i press mute after it starts,and then un-mute when i wanna have the rest of the sample jumping back into the mix so that i can hear the third and fourth bar for instance, it doesn't start. sample playback starts again with the next loop. It behaves as if instant mute is off, same is when its off. anyone else having the same issue?

dreadtafarian wrote:instant mute stopped working when i installed 1.9. if i have a sample that is 4 bars long and i press mute after it starts,and then un-mute when i wanna have the rest of the sample jumping back into the mix so that i can hear the third and fourth bar for instance, it doesn't start. sample playback starts again with the next loop. It behaves as if instant mute is off, same is when its off. anyone else having the same issue?

I have this problem too, I use instant mute all the time so it is a big issue

Please implicate continuous loop For mpc essentials please need this feature bad

Hard to pinpoint where its coming from, but I get software crashes.

When working with hardware synths and you setup a program change using MSB/LSB and program change number the bank doesn't switch unless you press the play button on the Touch, this is definitely not cool. It works fine on the Renaissance, although I did not test it on v1.9

I am experiencing audio issues with 1.9. It happens random where my audio begins to start crackling and i have to power off ren and restart software. Happens on a consistent basis. At least once in a 30 min session. Does anyone else experience this?

Are you using the built-in audio interface?

Yes I am using the ren interface

I can't access Air or Sonivox plugin presets on the MPC Touch (on Windows) with the exception of DB-33, MiniGrand, and the Riser, but I can access all of them on the Mac with the exceptions of Vacuum Pro, Transfusor, and the Playa pack. I think all the Air and Sonivox plugin presets should be accessible from the Touch and if nothing else there should be consistency between operating system platforms (Windows/Mac).
Also on the Korg M1 plugin the preset available are only the Combination mode presets and not the program mode presets, this is true for the Advance Keyboard too.

If I'm using a plugin and have the plugin's GUI up on the screen if I change to a different plugin the GUI does not update, I have to close it and open the GUI for the new plugin that I selected. This only happens on Mac not on my PC.