MPC-TOUCH: display: PROBLEM ! it is just mirroring

edit: the Header was slightly edited

Hi,

while installing my TOUCH, software, drivers etc,. i´ve choosed the option to NOT mirror my laptops screen.
But now it does just excatly this, all the time !
I just run now my MPC software but am still in mirroring mode,.......and seems i can´t do anything with my toucscreen.

where can i set that option again: to mirror, or to not mirror the laptops screen ?
how to get out temporarily for now ?

punkydoodle wrote:where can i set that option again: to mirror, or to not mirror the laptops screen ?
how to get out temporarily for now ?

main part: ( end first )
could it be that my broke accu from my macbook is the reason to fail on overtaking the "sharing spaces" setting instead of "mirroring screens" ?
( the new accu is here, i have no tri wing screw driver to install it so far )


story:
ok, i found out that when i run the MPC installer again, i get directly to the screen setup page.
Helps nothing, have donne this setting now many times again.

in the MPC software is a setting too. this was donne allready correctly. resetting it helps nothing.

resetting my settings in my macbook ( OSX11.2-ELCAP ) helps nothing,
But i got at one start up of the MPC software a error message that the "share spaces" has to be enabled in the screen setup of my macbook.
But as sayed, resetting the settings helps nothing.

On Yosemite you go to system preferences than to displays and uncheck the mirroring option.

There are some known issues with display link and OS X. You might be experiencing them.

dustymaestro wrote:There are some known issues with display link and OS X. You might be experiencing them.

ok, I was not aware !
.............not good then.
Thank You !
edit: the Threads Header was slightly edited


Yes, i was aware of the system preference settings.
There´s all set right. Plus i switched force and back now several times.

hmmm, what can i do ?
( i´m on a second hand macbook, i don´t have the original password.
I was able by plain luck to install the OSX ElCapitan as a "non-update", but i can´t just reinstall respectivly "update" my macbook in a common way.........plus i have NO clue of all this.......i´m out of any computer knowledge.....

?? ideas ?

Try playing with the settings in Preferences/Mission control.... there are some settings there that relate to spaces.

BremenCole wrote:Try playing with the settings in Preferences/Mission control.... there are some settings there that relate to spaces.

Yes, I see there one MUCH related checkbox, but not others.
I played with the settings fourth and back with that one checkbox, inclouding restart which i at first trys ´ve not donne.
( The box must be checked, i´m clear on that , at least i think )
Helps all nothing !

Thanks !
still clueless

the TOUCH so far only a expensive hardware dongle for the software........ well, not exactly as meant to be

Ok,
i have solved the Problem now !


I had to reinstall the MPC software.
then i got the first time a error message to see which guided me to the "MPC accessibility guide".
from there are you guided to (Mac): system preferences/ security and privacy/accessibility, and there you find a MPC Icon, this has to be enabled !

there you go, this evening, me: first time "Touching"


Thanks for the hands !

So glad you finally got it all sorted.

I'm a huge Touch fan, hope you can enjoy it as well.

can the mpc one also mirror in controller mode?