Technical questions for the MPC2000xl and the MPC2000
By JVC Sun Jun 19, 2016 10:41 pm
vinyl_junkie_1620 wrote:That is very strange that the same issue is also on the 8 out board I guess as you say it goes beyond the DAC's but something more with the machine itself.
This will sound strange but have you tried other cables?

It just perplexing. The XL works just fine. I didn't even notice that much.
I connect my headphone directly to XL. I hear the same sound. I'm sure it is not cable.
By JVC Mon Jun 20, 2016 3:37 am
I used test tone & pink noise from audio test CD (taken from CD lens cleaner CD) and played from my MPC2000XL, and recorded with Quattro USB in 24 bit 48KHz, stereo.
The test CD is in stereo, but I just used one channel to make WAVs for MPC, since left channel and right channel seem to be identical. (I did not merge stereo to mono.)
With this test I could not spot any obvious distortion.

Here's the zipped file. (42MB)

https://www.dropbox.com/s/7f3omp4ledvzvzk/MPC_test1.zip?dl=0
By JVC Mon Jun 20, 2016 8:38 pm
vinyl_junkie_1620 wrote:Checked the files and they look ok, very odd!

Right, I couldn't catch / detect any smeared part, like the Lately Bass.

I don't know why there was out off frequency on the WAV file.
Maybe I accidentally entered a wrong number (less than 100) to filter during recording.
But, either way, the noise was there.
User avatar
By Lampdog Wed Jun 22, 2016 12:41 am
Downloaded the exact link we pm'd about.

Directly from web into Triton Extreme USB mode (just like mpc1k) onto cf card.

Placed cf card into 2kxlse2, placed on a pad, loaded perfectly and actually sounds pretty damn good.
If listening in a car/elsewhere I'd swear it was a real synth.

I played it online through my computer/audio interface/monitors from the website and it sounds exactly the same as in 2kxlse2.

I don't hear any distortion at all on both, download and played on computer or played on 2kxlse2.
It sounds exactly the same, crystal clear.
User avatar
By Lampdog Wed Jun 22, 2016 3:02 am
Take out your ram, put sample on pad and try again with the default onboard 2mb.

Also, each stick one at a time in each slot. Weed out the bad stick if there is one.
By JVC Wed Jun 22, 2016 10:56 am
Lampdog wrote:Take out your ram, put sample on pad and try again with the default onboard 2mb.

Also, each stick one at a time in each slot. Weed out the bad stick if there is one.

OK, I'll try that. I think 2000XL has RAM test function, so I'll use that first.
By JVC Wed Jun 22, 2016 1:51 pm
By the way, 2000XL does have RAM check function, it's hidden function (I know that Lamp and others know this, but for the reference.)

http://www.mpc-forums.com/viewtopic.php?f=1&t=7022
http://www.mpc2000xl.com/secret.htm

Go to Trim screen (Press SHIFT + 5)
Then press SHIFT + 1, to go to hidden menu.

I'm going to run the test soon as possible.
I really appreciate all the help!
User avatar
By distortedtekno Thu Jun 23, 2016 4:17 pm
JVC wrote:I ran RAM test on 2000XL, but it passed the test. I’m going to take out SIMMs and do what Lamp suggested. (I've lost count how many times I opened my 2000XL!)

I've been following this topic and I'm curious to know what's causing the issue. Keep us posted. I have a feeling that it's something in the AD/DA circuitry rather than the RAM. But keep on the process of elimination. I'm sure it'll take a bit longer to repair. But it shouldn't be that costly to take care of.