Import Legacy Files into MPC Live Standalone Mode

Dear MPC-Forums Community

I've tried to Import MCP2000XL Files from a ZIP Drive via USB into the MPC Live: it worked.
I've tried to Import MPC3000 Files from a SD Card into the MPC Live: It worked.

BUT i can only see one Partition. How is it possible to see all my partitions on the ZIP or SD Card?

Thank you for your Help!

I believe MPC partitions are quite unique in their structure, here's a topic that discusses it, but long story short you might need to use Linux. viewtopic.php?f=4&t=30208

MPC-Tutor wrote:I believe MPC partitions are quite unique in their structure, here's a topic that discusses it, but long story short you might need to use Linux. viewtopic.php?f=4&t=30208

Thank you for the helpful Link!
So i have to get into Linux...

Regards

Brizco wrote:So i have to get into Linux...
Regards

Might be easier to just put the disk into your MPC2000/3000, load up each partition and re-save it to a different, single partition disk

MPC-Tutor wrote:

Brizco wrote:So i have to get into Linux...
Regards

Might be easier to just put the disk into your MPC2000/3000, load up each partition and re-save it to a different, single partition disk

True! I will do that with my MPC3000 Files, but i don't have the 2KXL anymore
But if i remeber correctly i can replace the 2KXL Files on the ZIPS with my MAC...

Thank you!
Regards,
Martin