Technical questions for the MPC2000xl and the MPC2000
By modular77 Sat Aug 09, 2003 10:17 am
dude...
have you guys been keeping up with the MPC4000 forum? almost everyone has some kind of complaint about their 4000 and all they seem to talk about is how akai's "goin' down". the 4000 always just seemed a little too decadant to me from the beginning anyway.. but i personally like hardware.. i like physically having a box that i can work on.. theres just a feel to the MPCs.. most likely its the pads.. but also its that sequencer.. it's like the atomic clock. but there are a lot of people who find MPCs outdated.. i was describing my setup to a friend of mine over AIM just this evening, and he even reliped to me that i'm "so outdated" but i disagree.. because my MPC2000XL works, and i know how it works.. and it really is the brain center of my setup.. then we keep hearing that akais days are numbered.. and i dont know what to think about that.. but do any of you find it odd that Roland is about to release its own MPC-like sequencer? i would Hate to think that roland bought the MPC design from akai, thus signaling akais inevitable demise... i'm talking about the Roland MV-8000 and in light of my disturbing theory, it actually looks pretty cool.. we'll see what happens when it hits the showroom...
User avatar

By Leory Sat Aug 09, 2003 11:33 am
I think it's good that Roland is tossing their hats in this. Of course I am a VS 1880 owner :wink: . I really think Roland likes offering folks an alternative to software; they are shedding light on a situation that Akai and others are turning the lights down on. Well that's just my opinion.

I don’t see myself getting one for a while… not until my MPC dies (probably never).

Leroy
User avatar

By MPC-Tutor Sat Aug 09, 2003 1:15 pm
Enough of the bold text! :x
User avatar

By Leory Sat Aug 09, 2003 7:01 pm
:roll:

:lol:


Leroy

By mpc3000 Sun Aug 10, 2003 3:07 am
"almost everyone has some kind of complaint about their 4000 "

This always happens with new gear. As gear gets older people talk less about it's problems. There are still known issues and bugs with the MPC3000. I have a list of over 20 known bugs in the MPC2000XL. People really don't talk about these.

"i would Hate to think roland bought the MPC design"

Didn't happen. You can clone a design without buying it.
By modular77 Sun Aug 10, 2003 3:11 am
im curious.. what kind of bugs does the XL have? ive had mine for a year, and havent noticed any.. and what about the 3000?
User avatar
By M.ic P.ro C.rusher Sun Aug 10, 2003 11:04 am
modular77 wrote:im curious.. what kind of bugs does the XL have? ive had mine for a year, and havent noticed any.. and what about the 3000?


The only one I've found is that when I use it for a while, and go to 16 levels, and pick the tuning option, I can only assign pad 4 for it's original level, whereas if I just turned my MPC on, I can use 1-16 freely.

Peace1

By mpc3000 Mon Aug 11, 2003 2:32 am
MPC2000XL bugs?!

ATAPI Zip and OS Update - You may run into a problem updating the OS of the MPC with an internal ATAPI Zip. If you update the OS from and ATAPI Zip, the MPC my fail to recognize the presence of the ATAPI Zip upon reboot. I suggest updating the OS from an external drive or by placing the floppy back into the MPC for updating. I have not fully tested this issue or the fix.

Going from Play to Overdub and back to Play without stopping the sequencer disables the Next Sequence function.

When an MPC is slaved to midi clock, it will start upon pressing play, but the tempo field still shows EXT. Although you can still change the tempo, you cannot see what the value is.

Changing TC while in Step Edit screen causes a bug in the sequencer's edit screen. The Start and End times will lock as the same value. (Thanks to Dopy for finding this one). Alex from monomusik Cologne/Germany found that changing the TC value in the step edit screen also affect the punch in/out times. Thanks to both! Akai now has this info and verified the issue. It has been submitted for fixing.

I've found that if I have data in the first few bars of the MPC and I go to LOAD and switch from SCSI to ATAPI (I have both in the machine), the MPC decides to spit out the note and even sysex data from the sequencer. I know it's a very strange place for a sequencer bug and I don't know if this happens for the floppy too. It's very easy to recreate.

When the unit is playing and slaved to midi clock, and you change the NV slider options, it goes into stop mode upon leaving the NV options page.

At least a couple of us have managed to get the XL to crash. Appears to happen during track editing/quantizing. Akai still has the debug routine in the OS when error occurs, so we get screenfulls of memory dumps. Programmers need to remove the routine and insert failsafe routine to drop back to screen without data loss.

Incorrect information in the Midi implementation charts. CC#7 does not control the NOTE VARIATION SLIDER and CC#6 does not enable the NOTE REPEAT FUNCTION. After speaking to Akai about this, there appears to a misprint in the midi implementation chart.


These are just mine. I have a more extensive `unofficial list` but I really do not have permission to post it. And it is long.