Support and discussion for all of Akai’s modern standalone MPCs including the MPC X / X SE, MPC Live 1, 2 & 3, MPC One / One+, MPC Key 37/61.
By CharlesRandolph Mon Jun 10, 2019 8:53 pm
dryad-66 wrote:Well if you read the thread :Sigh: you can see :shock: that i tried all 3 cables i had here.


dryad-66 wrote:Mine came without original USB lead.So ive tried 3 older ones. Latency huh?Damn..... Might try some new usb leads..



I asked because you've stated you've tried 3 older ones and might try a new USB cable. I also asked what MAC OS you were running, but you never replied. Nevertheless, its good that found something that works. How do you plan to use the 2000, 2000XL, 1000, ASR-X and the MPC SOFTWARE together?
By dryad-66 Mon Jun 10, 2019 11:02 pm

I got 2 mbpro's running here.1 from 2009 and 2010 running 10.6 and 10.9 respectively and never upgraded the OS es since new.LOL

edit-there both acting up and battered atm tho.......... :roll:


From earlier in the tread...

How do you plan to use the 2000, 2000XL, 1000, ASR-X and the MPC SOFTWARE together?


Well i will use them individually and push them knock up some pieces and join em up at some point and jam out and record-i dont usually midi sync,im an old school type (old fashioned lol) and play them and mix like decks start stopping them and muting ect.And record through the motu.The Asr fell through as the guy felt a sudden attraction for it when it was time for me to pick it up......Ive taken on another ASR project this eve and in the morning a Roland MC909 project and got the 2000 and SP404 and a couple of keys.Its just one big mix.Lots of happy accidents....

Machines come and go through my place all the time.I buy and try to fix up,record and often sell.

I asked because you've stated you've tried 3 older ones and might try a new USB cable


Your right but i did try a brand new one.And i rang Akai and they said its probably my OS.
By CharlesRandolph Tue Jun 11, 2019 4:32 am
dryad-66 wrote:Well i will use them individually and push them knock up some pieces and join em up at some point and jam out and record-i dont usually midi sync,im an old school type (old fashioned lol) and play them and mix like decks start stopping them and muting ect.


I thought MIDI was old school. :nod:


dryad-66 wrote: I got 2 mbpro's running here.1 from 2009 and 2010 running 10.6 and 10.9 respectively and never upgraded the OS es since new.LOL

edit-there both acting up and battered atm tho.......... :roll:


Thanks for re-posting it. Yeah 10.6 and 10.9 leaves you high and dry. So what MPC software version actually runs on your system?
By dryad-66 Tue Jun 11, 2019 6:53 am
I thought MIDI was old school. :nod:


I only started midi in the late 90's :roll: I like the machines to find there own sync.Shift off the grid a bit.Like analog mixing.
So what MPC software version actually runs on your system?


OS 2.5 is running fine Mac os10.9 apart from the Live not finding it.
By CharlesRandolph Tue Jun 11, 2019 9:46 am
dryad-66 wrote:I only started midi in the late 90's :roll: I like the machines to find there own sync.Shift off the grid a bit.Like analog mixing.


Analog mixing? Like tracking two 24 tape decks or are you referring to mixing Vinyl records? Do you have a link to finished song, using that technique?
By dryad-66 Tue Jun 11, 2019 11:15 am
Well if you play two digital units and trigger them in real time thats analog.lolRather than itb where everything is tied to the exact same clock.No air there.BTW i started off doing theatre/soundtrack work for plays ect cutting up tape and working tape multitracks.Im not an analog phile of anything but i grew up through punk and the records and tapes dubbing times.Thats me.I lie things when they go out of tune/sync or some distortion is added.But as long as i have some control over it.TBH id be just as happy produ ctive in some ways i guess just with a mouse and chpping stuff up on an old copy of Cubase VST and soundforge lol