Koldunya wrote:I don't think it will work. Look at the rear panel. It only has left and right outputs for monitors, it's meant to be a USB audio interface for a computer =/
As Yorgos said, it also has 2 x TRS (balanced) outputs and can be used as a standalone pre. I just need the USB port to power it.
Koldunya wrote:I don't see an edit button... the AT3035 uses 3.5mA of current/amps on phantom, FYI
The forum post edit button should be at the bottom right of any post you make. It's the little "gear" icon with the angled arrow pointing down.
Thanks for the info on my AT3035. I'm not sure if the USB-powered pre will deliver that sort of amperage, but my RME Babyface Pro seems to handle phantom power just fine running off an old USB 2.0 port. I use my AT3035 with it all of the time.
*EDIT: USB 3.0 (which is the port on the MPC Live) delivers up to 900mA. And USB 2.0 delivers up to 500mA. I'm sure my AT3035 will work just fine.
W10 | Reason 11| S1 4.5 | Intel i7 3770k | 16 GB RAM | Reactor 1TB SSD | RME Babyface Pro | Panorama P-4 | Akai MPC Live | Roland System 8 | Roland TR-8 with 7x7 Exp | Roland TB-3 | Roland VT-4 | Roland MX-1