Support and discussion for all of Akai’s modern standalone MPCs including the MPC X / X SE, MPC Live 1, 2 & 3, MPC One / One+, MPC Key 37/61.
By CharlesRandolph Sun Jul 21, 2019 1:10 pm
Icepulse wrote:Probably because you haven’t looked at the last 3 pages of these two arguing and back-biting. If you were in the thread since the beginning, like I’ve been, you’d know what I’m saying.


Looking back on it, I apologize for being apart of the derailment of this conversation. I'll be sure to check my off topic interactions for now on. :nod: I don't apologize, for calling out a long time existing member, who creates troll accounts, simply to disrupt the forum.

Edited for Typos.
Last edited by CharlesRandolph on Sun Jul 21, 2019 1:26 pm, edited 3 times in total.
Bymember04959388 Sun Jul 21, 2019 1:20 pm
Icepulse wrote:
Frisbi wrote:I am not bored about Enochlight discussions.
Mr. icepulse you are quite aggressive and I don't understand why you make this mess.
Just skip the thread if you don't like what people say in it.
Easy.


Probably because you haven’t looked at the last 3 pages of these two arguing and back-biting. If you were in the thread since the beginning, like I’ve been, you’d know what I’m saying.

Ok I understand but is it so bad?
Just guys playing around.
Never mind.
User avatar
By zangetsu01 Sun Jul 21, 2019 1:38 pm
CharlesRandolph wrote:Looking back on it, I apologize for being apart of the derailment of this conversation. I'll be sure to check my off topic interactions for now on. :nod: I don't apologize, for calling out a long time existing member, who creates troll accounts, simply to disrupt the forum.

Edited for Typos.



You can't possibly mean it was that guy that once went with the name: Unf*ckablewith??
If it's him I would understand.. :smoker:
User avatar
By Fanu Sun Jul 21, 2019 2:14 pm
zangetsu01 wrote:
CharlesRandolph wrote:Looking back on it, I apologize for being apart of the derailment of this conversation. I'll be sure to check my off topic interactions for now on. :nod: I don't apologize, for calling out a long time existing member, who creates troll accounts, simply to disrupt the forum.

Edited for Typos.



You can't possibly mean it was that guy that once went with the name: Unf*ckablewith??
If it's him I would understand.. :smoker:


Oh damn that guy!
An MPC hater on an MPC forum, not even using an MPC yet he had it on his album cover :lol:
User avatar
By Icepulse Sun Jul 21, 2019 3:01 pm
Fanu wrote:
zangetsu01 wrote:You can't possibly mean it was that guy that once went with the name: Unf*ckablewith??
If it's him I would understand.. :smoker:


Oh damn that guy!
An MPC hater on an MPC forum, not even using an MPC yet he had it on his album cover :lol:


Now HE was entertaining.
By TT_Lab Sun Jul 21, 2019 5:22 pm
Enoch is not that 8800 guy...I've known enoch for long ago from Reason official forum and then from ReasonTalk. He just got his first MPC if I'm not mistaken, posted about it not long ago in RT.
I can see he is a like him or hate him kind of guy, bit edgy at times because he use to be very passionate about the products(Reason in thos forums) he likes, called fanboy sometimes, but always willing to help a fellow.
That's why I don't understand his possition going further with this bickering.
User avatar
By zangetsu01 Sun Jul 21, 2019 7:57 pm
Okay but what happened to the Unf*ckablewith..?? Did he suddenly disappear or secretly bought himself an MPC X and now hates him self for dissing these units for so long..??
By Cockdiesel Sun Jul 21, 2019 8:50 pm
hes Been in the hospital since his MV fell on him.

Either way, I’m looking forward to seeing how this automation works. I have my bases covered for the most part and it seems like a cool added bonus

The als support is a big added bonus. I bought the force and while it needs a lot of work it’s one hell of a sequencer. Really fun working with the synths and keygroups I’ve made. However with the als support I might be better off with just selling live and force for the x and getting a used push.

Not sure I really only use to the computer to mix stuff and make keygroups. Being standalone I love. The force is big but it’s pretty cool to set it up next to the couch.

It’s a tough call between not wanting more “stuff” laying around and having a really cool machine in the force. The sampling, and interface is really dope.
User avatar
By Danoc Sun Jul 21, 2019 9:31 pm
Cockdiesel wrote:hes Been in the hospital since his MV fell on him.

.

:lol: :lol: That's a classic lol

He was a funny dude. I didn't get mad at him, he was just to funny.
He even got on me, it was to damn funny. I showed where Pete told me the live was on a boat heading my way. The Un... Showed a ship with Akal's name on it. It was the funniest crap l have seen. I couldn't get angry, l use to come on just to se what he said about the MPCs lol
By TT_Lab Sun Jul 21, 2019 9:50 pm
zangetsu01 wrote:Okay but what happened to the Unf*ckablewith..?? Did he suddenly disappear or secretly bought himself an MPC X and now hates him self for dissing these units for so long..??

:lol:
User avatar
By EnochLight Mon Jul 22, 2019 2:44 am
CharlesRandolph wrote:Looking back on it, I apologize for being apart of the derailment of this conversation.


I totally accept your apology. It takes a lot of courage to admit your faults. Cheers!

CharlesRandolph wrote: I'll be sure to check my off topic interactions for now on. :nod: I don't apologize, for calling out a long time existing member, who creates troll accounts, simply to disrupt the forum.


Yikes - who was that?

TT_Lab wrote:Enoch is not that 8800 guy...I've known enoch for long ago from Reason official forum and then from ReasonTalk. He just got his first MPC if I'm not mistaken, posted about it not long ago in RT.
I can see he is a like him or hate him kind of guy, bit edgy at times because he use to be very passionate about the products(Reason in thos forums) he likes, called fanboy sometimes, but always willing to help a fellow.
That's why I don't understand his possition going further with this bickering.


Yeah, I've had the same forum name everywhere for almost 20 years.

Meh, it's water under the bridge. Life's too short to worry about stuff like that. That said, I feel great that I have officially reached the "like him or hate him" category though. :lol: :smoker: And yeah, the MPC Live is my very first MPC. It's the only reason I joined this forum.
By CharlesRandolph Mon Jul 22, 2019 7:14 am
Cockdiesel wrote:hes Been in the hospital since his MV fell on him.

Either way, I’m looking forward to seeing how this automation works. I have my bases covered for the most part and it seems like a cool added bonus

The als support is a big added bonus. I bought the force and while it needs a lot of work it’s one hell of a sequencer. Really fun working with the synths and keygroups I’ve made. However with the als support I might be better off with just selling live and force for the x and getting a used push.

Not sure I really only use to the computer to mix stuff and make keygroups. Being standalone I love. The force is big but it’s pretty cool to set it up next to the couch.

It’s a tough call between not wanting more “stuff” laying around and having a really cool machine in the force. The sampling, and interface is really dope.


With the submixes coming, at least those can be midi learned to external faders. The submix are stereo, but they only give you 10 outs on the MPC X. We would need at least 16 outs if, someone is live tracking from them. Maybe Akai Pro will put out a break box, that will add an additional 8 outs.

Just think what two ADAT in/out ports, could've have done. Or 1 ADAT and 8 analog outs, that won't mirror each other. :nod:
By TT_Lab Mon Jul 22, 2019 11:19 am
EnochLight wrote:"like him or hate him" category though. :lol: :smoker:
Based only in the reactions I've seen from people there in RT :nod: