Tracking out to Tascam M2525 using 6 outs MPC Live

Hi Guys. Here is my configuration:
Track 1 - Kick - Out 1 going to channel 17 in the mixer.
Track 2 - Snear - Out 2 going to channel 18.
Track 3 - Hihat, Hihat 2, Open Hihat - Out 3 going to channel 19.
Track 4 - Melody - Out 4 going to channel 20.
Track 5 - Bass - Out 5 going to channel 21.
Track 6 - Melody Adds -Out 6 going to channel 22.

And what I hear from Tascam is:
Channel 17 - Kick, Snear, Open Hihat. (WRONG)
Channel 18 - Kick, Snear, Open Hihat. (WRONG)
Channel 19 - All Hihats. (FINE)
Channel 20 - Melody. (FINE)
Channel 21 - Bass. (FINE)
Channel 22 - Melody Adds. (FINE)

I cannot find the issue. Everything assigned properly in the Pad Mixer. I was checking Channel Mixer in MPC too but without any luck.
Anyone had similar issue?

All mono samples. I was thinking that might be related to program, however I would hear all Hihats, not only open Hihat in channels 17 and 18.

yep its related to program, dont send anything to there is you want separation, its like a group

Caustic Yoda wrote:yep its related to program, dont send anything to there is you want separation, its like a group

It doesn't make any difference if I change program outs form 1 and 2 to any other number.

Try making a new project, very basic with only a kick, snare, hat and crash. Then try it again. Still no luck?

It could be something to do within that project. This way you can eliminate that.

Playing with returns settings helped in this case however I have no clue why I had to choose those settings. Doesn't make any sense to me but I have achieved what I wanted to achieve. Thanks all for your response.