S900/S950 jog wheel cap replacement

Anyone know where I can find a suitable replacement? My 3 yr old decided to swipe it and it's vanished. Thanks

eBay?
Reverb?

Search for S900/S950/MPC-60 parts?

since these caps are standardized many caps from old amps, receiver, tapedecks whatever will fit.
I didn't like the original so I use a bigger knob (more like the one from the s1000). Found it on a broken tuner/amp that was sitting in my cellar and waited for this moment to give awy this spare part




There are two different types of shafts (well there are more but two are the most common)
you neet a knob for this type


and NOT this type



So go around in your house (or your peeps house or wherever) and if you find a knob you like, grab it and look if it uses the same shaft. If so......take it



peace

As an example, have a look at this: https://www.ebay.com/itm/Vintage-70s-Stereo-Silver-Metal-Replacement-Tuner-Knob-Hitachi-SR-303-more/123330123878

Look for a larger knob type that has a screw hole for tightness adjustment:

You will need to remove the front panel of the S900/950 before you can securely install the knob but should be fine after that. Use the search term "Large Stereo Knob" or something similar on eBay, it'll be fine.

any of the major electronic component suppliers will have dozens of compatible knobs to choose from. more than likely the number of offerings will be overwhelming. you'll just need the specifications.

https://www.instructables.com/community ... Suppliers/

Hi,

The jazzcat sells these! Hes uk based you can find him on ig, facebook or ebay.

cheers ghost

If the data knob is the same diameter as an MPC3000 or s3000 sampler, then these aluminum knobs will fit... https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F333414526065