MPC Live won't read SD Card

What's up. When I put an SD card into my MPC Live, it won't read it. I formatted it right, and it read it for a little while however it won't now. A friend had mentioned that if a hard drive is installed (one from a laptop) the Live will overlook the SD Card. I'm not sure if this is the case, but I can't get it to appear.

Also, If I do get the Live to acknowledge the fact that an SD Card is inserted, will that card need to be re-formatted? Will the beats that I saved on the card for the short amount of time it actually worked be gone? I tried searching older threads but when I enter the keywords in the search field, I get so many results it's impossible to go through them all. Lol.



Thanks

The MPC Live/X/One can see multiple drives be they HDD/SSD/SD/USB when they are mounted at the same time in standalone mode.

NearTao wrote:The MPC Live/X/One can see multiple drives be they HDD/SSD/SD/USB when they are mounted at the same time in standalone mode.

So perhaps the card itself is the problem?

Any idea of what might have caused the card to go south?

Try a different card. Format it outside of the MPC

Doc00Cosel wrote:

NearTao wrote:The MPC Live/X/One can see multiple drives be they HDD/SSD/SD/USB when they are mounted at the same time in standalone mode.

So perhaps the card itself is the problem?

Any idea of what might have caused the card to go south?

I'm thinking it has to be. I have no other explanation for it

Buy a new card and keep it moving. No point in troubleshooting and get frustrated over it.