EnochLight wrote:If you plug something into the Phono input and leave the switch set to Line, the phono level amp stays off and you can use the RCA inputs as line-level.
Yes?
Try it and report back.

EnochLight wrote:If you plug something into the Phono input and leave the switch set to Line, the phono level amp stays off and you can use the RCA inputs as line-level.
Yes?


PAGE 16 or 18 of MPC X manual. Depending on which version you look at.
http://b8e57dc469f9d8f4cea5-1e3c2cee90259c12021d38ebd8ad6f0f.r79.cf2.rackcdn.com/Product_Documents/MpcTuiManual.pdf_488c7330b3aa119f11953f54a6a3b8be.pdf
8.Phono/Line Switch: Set this switch to the appropriate position, depending on which Input 3/4 connectors you want to use. If you are using the 1/4” (6.35 mm) inputs, set this switch to Line. If you are using the RCA inputs, set this switch to Phono to provide the additional amplification needed for phono-level signals.
or
How many inputs and outputs are on the MPC X?
The MPC X features 8 balanced TRS outputs and 4 combo inputs. Inputs 1 and 2 will support mic and line levels (+48v phantom power available) and inputs 3/4 will support phono (RCA) and line level (1/4" TRS) inputs. Important: The RCA inputs are intended only for phono-level audio. Please be sure not to connect line-level audio sources to this input.
https://www.akaipro.com/kb/akai-pro-mpc-x-and-mpc-2-0-frequently-asked-questions/#IO

64hz wrote:Why give you the option to switch to line then?


CharlesRandolph wrote:Try it and report back.
CharlesRandolph wrote:So I'm waiting to hear back from the ENOCH test. Maybe they changed it but didn't correct the MPC X and MPC Live information. He should turn up his line level devices all way up, just to make sure the signal is hot enough. Then flick the switch to phono. Don't forget to turn on the speakers and put on headphones (Turned all the way up.)![]()
![]()
![]()
![]()
![]()



