New Expansions not loading on MPC One 2.10

This is my first post. I hope I'm not violating anything. MY latest MPC Expansions aren't loading into the MPC. The MPC shows two folders with the first letter of the expansion name; "H" and "M". The MPC loads all previous MPCs loaded, but it won't load new additions. Is there a fix for this?

Are they in the right format?

64hz wrote:Are they in the right format?

I've exported them from the MPC Beats file. Should be. After I load them,. and load the SD Card to the MPC and try to reload it back to my PC the file folders are empty.

Thanks for the reply.

bump

Post a video - will be a lot easier to see what you're doing wrong. Tens of thousands of MPC Beats/MPC Software users out there and no one is reporting any issues with exporting/loading Expansions on to their standalone MPC, so you're likely doing something...

I just backed up my SD card, deleted everything, then reformatted the disc. After reformatting I fixed any errors on the disk then added everything back including the new expansions and new synth content AND IT WORKED! I'm so happy. I've been battling these two issues for a while. Now I get to use my expansions and the new plug-ins. Woohoo!

Corrupt disks can cause all sorts of weird issues. Just be aware that once a disk starts getting corrupted it's probably going to permanently fail in the not too distant future, re-formatting might only be a temporary fix. I would suggest you at the very minimum make sure you are backing up your work to another location daily, and if you experience these problems again just bin the SD card and replace with a new one.

Probably the main cause of disk corruption issues is forgetting to eject the disk before disconnecting your MPC from your computer, so make sure you always eject correctly.