How to change sampler's max length?

I tap the max length field in the sampler, but there's no response. Other controls in the sampler respond to touch as expected. What am I missing? I made a video here:

https://vimeo.com/732686912

I must be misunderstanding your issue, but double click the same length field will bring up a popup, allowing you to set its length (or q-links 3&4). Max length is 20 minutes

I tap and double tap all over the area in the sampler where it says "MAX LENGTH," but nothing ever happens to enable me change it. Notice in my video how the focus stays on the threshold vertical slider while I'm tapping on the "MAX LENGTH" area of the screen. What am I doing wrong?

blipson wrote:I tap and double tap all over the area in the sampler where it says "MAX LENGTH," but nothing ever happens to enable me change it. Notice in my video how the focus stays on the threshold vertical slider while I'm tapping on the "MAX LENGTH" area of the screen. What am I doing wrong?

Sorry, just realised you're on the Force .... I'm on MPC One. Mine works as expected as per my comment above, so really don't know what to suggest.

So when you tap that it should get the red highlight line around it. At that point you can turn the data wheel - I just tested this in 3.1.3, no problem. So, not sure why that isn't working for you, but make sure you are running the latest firmware and maybe try MENU > PREFERENCES > RESET PREFERENCES

The other way to change the length is to hold down the KNOBS button, select SCREEN and the minutes and seconds are controllable via the Qlinks.

A couple of restarts later, and the problem has disappeared. I did verify that that part of the screen was functional for other things, so apparently this is a firmware glitch. I do have the KNOBS>Screen trick as a backup that doesn't require max length to have the focus to change it, so thanks for that.

Same here. According to the manual it should be possible. (page 253)

Use the Max Length field to define the maximum sampling time.

AnSolas wrote:Same here. According to the manual it should be possible. (page 253)

Use the Max Length field to define the maximum sampling time.

After a restart it was working as expected. (using 3.3)

On MPC the transport must be stopped in order to change the length of sampling time. This has caught me out a few times.

frankie13 wrote:On MPC the transport must be stopped in order to change the length of sampling time. This has caught me out a few times.

Yeah, I didn't knew that. <3