CAD drawings for MPC One Data Wheel?

Hi all,

I'm looking for a CAD drawing or some detailed measures of the MPC One Data Wheel.
I love the one with the thumbnotch that mpc-parts sell but their shipping rate to europe is ridiculously expensive for such a small and lightweight part, so I decided I might draw something similar and ask a friend with a 3D printer to print it for me.
Not trying to steal their design, just want something that will allow me a faster spinning

Thanks!

Use a half-round mill or drilling tool of matching size and apply it mechanically on your wheel.
Or heat up a metal bolt of similar shape and press it to the proper location.
Both methods may need sanding/polishing...
But: do some tests 1st on something disposable

The MPC 1000 OG wheel fits on the One perfectly and you can spin that.I did it on mine….

Telefunky wrote:Use a half-round mill or drilling tool of matching size and apply it mechanically on your wheel.
Or heat up a metal bolt of similar shape and press it to the proper location.
Both methods may need sanding/polishing...
But: do some tests 1st on something disposable

Quite hardcore for me.. hehehe

dryad-66 wrote:The MPC 1000 OG wheel fits on the One perfectly and you can spin that.I did it on mine….

I just found the CAD model for the MPC 1000 wheel.. If you say that it fits fine on the One then I'll buy the file (5$) and maybe modify it or print it as it is..

Thanks!

In Europe you can buy aluminium knob:
https://www.amazon.nl/-/en/dp/B08RJN9QZB/
You can find it on Aliexpress too for $4.
Its better than mpc-stuff plastic knob.
Fits the MPC perfectly.

If you're printing, maybe do a couple as I'd be interested in purchasing one. The little dip is really good at preventing wrist fatigue