Cracks and Pops recording Audio tracks using Arturia Studio

im quite confident that all these crackle problems are related to the interface and the mpc running at different sample rates. if you can tell the interface to run at 44.1 it should work (or whatever the mpc uses i forgot).

sixbiomes wrote:im quite confident that all these crackle problems are related to the interface and the mpc running at different sample rates. if you can tell the interface to run at 44.1 it should work (or whatever the mpc uses i forgot).

No it can't be because MPC does not recognize the interface if its not previously set to 44.1

Also see here for more discussion on the audio interface issue. Sadly, there are very few audio interfaces that work with the MPC's without introducing cracks and pops when recording.

https://www.mpc-forums.com/viewtopic.php?f=48&t=211654

Unfortunate. There's an 18 page sticky thread detailing that exact issue

sixbiomes wrote:im quite confident that all these crackle problems are related to the interface and the mpc running at different sample rates. if you can tell the interface to run at 44.1 it should work (or whatever the mpc uses i forgot).

Nah. It's broken. This is well documented

Hey, any update on an Arturia Mini-lab 3 midi con serving MPC studio, specifically regarding audio quality. Same compositional goal, less in DAW, then Logic…