Turntable > Audio Interface > MPC Live

Hello. I know that I can sample directly from my turntable to my MPC Live in Standalone. Is there a way to sample from the TT > AI > MPC? I'm using a Numark PT101 USB and a M-Audio Air 192/8.

what types of outputs do you have on that turntable and what input types do you have on the ai?

RCA on the turntable. A set of Aux RCAs, a set of Main RCAs on the AI. I thought I'd be able to use a set of RCAs from the MPC to the AI, and the other set from the AI to the TT. However, when I try to sample there's no audio output to my monitors.

handthrow wrote:what types of outputs do you have on that turntable and what input types do you have on the ai?

RCA on the turntable. A set of Aux RCAs, a set of Main RCAs on the AI. I thought I'd be able to use a set of RCAs from the MPC to the AI, and the other set from the AI to the TT. However, when I try to sample there's no audio output to my monitors.

You should check whether it‘s a line out or phono out at your record player and set the Live‘s input accordingly.

My guess: try getting into SAMPLE REC and activate the monitor button.

Get some rca to ts couplers plug it in the front of the unit where the guitar symbols are (the lines with the preamps). rock on.

Sorry, didn‘t get that you (bistroknox) are just lacking adaptors.

See this:
RCA to 1/4 Adapter, RCA Female to TS 6.35mm Mono Male Converter Audio Connector Plug Gold Plated for Mixer, Amp, Subwoofer (6-Pack) https://a.co/d/5MgjRbn

Thanks guys. I'll give it a try.