Sampling Vinyl and how to optimize the best Sound Quality

My threshold slider is set to -50.0db, Input 3/4 is selected as it should be. The button on the bottom right is turned OFF. Still no signal

I tried switching the MONITOR button on and off. No signal either way

Have you switched the input button to PHONO (rather than LINE)?

Hello

Yes I have selected Phono at the back of my MPCX and I still do not have a signal. For the record, when I select LINE, I do not get any sound at all.

Turn the input dial up if not been suggested heh. it's always this..

erm double post. its on the back of the machine!

Terrico wrote:The sound I am getting is muffled. it sounds like the sample was recorded using an old 80s tape recorder. When I record samples in standalone, it sounds exactly like the record. I feel like im back to square one in a sense. Im thinking the problem lies in my software settings if I am not having the same issue while in standalone.

thx

you need to change your audio buffer settings to a higher number:

go to the edit menu then

go into preferences, on the audio device tab

set audio buffer to at least 4608 or above

until ur input sounds clear