MPC live/live II battery board

Hi there!

I want to modding my mpc one and add a battery inside. I did research and realized that mpc one have the same motherboard as denon prime go (prime go is battery powered)

But now i try to find a photo of the mpc live battery board (under heat shrink)

Because I have no opportunity to buy original battery, I’ll have to make it with available components

Can anyone make photo of mpc live battery board for me? Pls

Do you have the black MPC One, or the new red One? The reason I ask, is that the New red one is 12V and the older black one is 19V. The live2 is 19V, so that battery may not match the new red One.

Also someone mentioned in a previous thread that the firmware for the Live has bettery mangment software, but the MPC One does not.

Neodymium wrote:Do you have the black MPC One, or the new red One? The reason I ask, is that the New red one is 12V and the older black one is 19V. The live2 is 19V, so that battery may not match the new red One.

I have black mpc one, but it doesn’t matter, cuz battery power is 14,8v and motherboard have different power on it

I don’t shure about software, but I want to try. Hakai offer one software build for each devices

See here:
viewtopic.php?f=48&t=211295