No Sound after MPC 3.0 update

As the title says my Live 2 is mute after the update to 3.4.0.105. I tried resetting prefs, logging in and out of my Profile. Everything is correctly activated. Loaded different demo songs, no dice. Sound works again after downgrading to V2. Any ideas??

Not aware of this as being a known 3.4 issue (there have been various related bugs in the history of 2.x though, where projects could suddenly lose sound, although this was always remedied by a re-boot). You should submit a bug report to Akai (and return to 2.15.1).

Dead silent or annoying wave sound? The latter then you have perhaps not quite yet activated the beta. Way at the bottom in activation menu is were you find it

Im having the same issue. It shows the .wav and meters move but no output sound.

Any fix for this? My MPC Live 2 speakers are mute as well.

MPCWeapon1 wrote:Any fix for this? My MPC Live 2 speakers are mute as well.

Plug in a compatible audio interface, enable it and see if that works. If it does then disconnect it and try the internal audio again.

Sometimes it kick starts the audio driver to work again after you disconnect it . This worked for a few people with a different audio issues years ago .

kaydigi wrote:

MPCWeapon1 wrote:Any fix for this? My MPC Live 2 speakers are mute as well.

Plug in a compatible audio interface, enable it and see if that works. If it does then disconnect it and try the internal audio again.

Sometimes it kick starts the audio driver to work again after you disconnect it . This worked for a few people with a different audio issues years ago .

This!!! Thank you so much! I was worried I finally had my first bad experience on Reverb. Plugged in my AudioBox 96... speakers and headphones immediately started outputting audio, and continue to work after unplugging the interface.

*edit* shoot someone beat me too it lol.

go to the settings menu, find the soundcard drop down, select internal and turn the dial to reset the internal soundcard. if that doesn't work, plug in an external switch back and forth between them and see what happens. it should re-initialize it's connection to the alsa server.