vst3 support, awesome. It works, diva, and smaller, unknown brands. All works.
These bugs were when I used the MPC One + 3.5 in standalone mode with MPC 3.5 software.
1. Empty VST3 Presets.
Empty VST3 Presets show empty on PC. You can save them on MPC hardware and software, and load, but once done, it shows empty.
2. Audiomixdown silent audio file.
After converting to sequence, and from the arranger screen to the menu, to save to Audiomixdown at the default, just add 3 seconds. It writes an empty audio file. saved in a new folder under
C:..... ./documents/mpc3/stefsamples/.. tried 2 times. Then I tried exporting the song instead, and that worked successfully. It's still different because the song mode is different from the compiled (conv-seq) sequence of the song if edited.
3. Each time I change the TC, the pads return to bank A.
While recording, I change the TC sometimes, and each time after that, the pads are set to bank A.
4. still blue bootscreen wifi... after new help screen with QR code. need to go through 3 splash screens
to boot.
5. Chords Pro/ W.A. Production, it's a VST3 that outputs MIDI. i wonder how it would work on MPC 3.5?
Kontakt 8 can output MIDI too but I haven't got it to work in MPC 3.5
thank you
ps: I successfully loaded a project made on MPC One+. in MPC 3.5 software with MPC in standalone mode
I would like to see chord inversions, low mid high root etc...
