technonsia wrote:vst3 support, awesome. It works, diva, and smaller, unknown brands. All works.
These bugs were when I used the MPC One + 3.5 in standalone mode with MPC 3.5 software.
1. Empty VST3 Presets.
Empty VST3 Presets show empty on PC. You can save them on MPC hardware and software, and load, but once done, it shows empty.
2. Audiomixdown silent audio file.
After converting to sequence, and from the arranger screen to the menu, to save to Audiomixdown at the default, just add 3 seconds. It writes an empty audio file. saved in a new folder under
C:..... ./documents/mpc3/stefsamples/.. tried 2 times. Then I tried exporting the song instead, and that worked successfully. It's still different because the song mode is different from the compiled (conv-seq) sequence of the song if edited.
3. Each time I change the TC, the pads return to bank A.
While recording, I change the TC sometimes, and each time after that, the pads are set to bank A.
4. still blue bootscreen wifi... after new help screen with QR code. need to go through 3 splash screens
to boot.
5. Chords Pro/ W.A. Production, it's a VST3 that outputs MIDI. i wonder how it would work on MPC 3.5?
Kontakt 8 can output MIDI too but I haven't got it to work in MPC 3.5
thank you 
ps: I successfully loaded a project made on MPC One+. in MPC 3.5 software with MPC in standalone mode
I would like to see chord inversions, low mid high root etc...
Well damn, let me add mine:
• Multitimbral doesn't seem to be working. I.e. 1 instance of kontakt with 16 channels routed to 16 different midi tracks in the MPC
• Not being able to adjust the time signature from anything other than 4/4
• drag and drop Doesn't work at all. At the very least go back to how it worked in 2.15 but this was 1 of the things I was hoping would be improved in 3.5. Where we can just drag midi on track 2 and it's there instantly like how FL or Ableton works.
• When you switch from 1 track type (plugin, drum, audio) to another, it removes the name of the track and you have to Rename it again.
• Imported templates from 2.15 doesn’t completely work with Multitimbral setup when using vsti. Can only hear midi channel 1 and the rest of the tracks are still set to the default source even after full plugin scan.
• Go back to track mute mode only showing 2 colors like it was in 2.15. It’s confusing to know what’s on and what’s muted now with the pads being different colors. Yellow on & red off was cool or, allow for the user to customize the colors.
• Can't load or save effects racks chains
• Track and sequence Events double and half speed options are gone
• Latency on Izotope Ozone 11 even when the effect chain is turned off and the overall insert effects are turned off.
• Waves plugin GUI sometimes shows up as black screen
• Unable to customize the top toolbar with the different views the way you could in MPC 2.15
• Cableguys Halftime, Flexbeat, Shaperbox 3 (Time Tool) seem to cause distortion, popping and clicking. It’s almost as if these are using the max amount of memory and causing the pc to slow down. These are on my template in MPC 2.15 and I’ve never had this issue. It seems to be only time-based FX that I’ve experienced this on as the panning and filtering tools in Shaperbox 3 sound fine. I tried this on submix 1 and Output 1/2, as well as on an individual Plugin track on a Lead using Serum and I get the same result. My buffer setting was set to 1024 at 44100 Sample Rate.
• Insert effects power button is on as well as the selected effect, but the effect still shows grayed out. If you click it, it will light up for a second but then just opens the effect interface. Although, it is grayed out it appears to be active while the button is active. It is a little confusing
I did report these to Akai. let us know if any of you guys figure some of this stuff out
clicking the 3 dots for reset mode menu does nothing as well. can I backdate the OS and firmware without causing any issues? ?