MPC 3000 EU Transformer into US MPC 3000

HI there!
I have bought an MPC 3K from the States so it is basically OG with his main 110V transformer inside. I live in EU and was lucky enough to found an OG EU transformer for the 3000.
Basically it's the only thing to swap or do I need to change all the fuses on the filter board? Is there anyone already done that?
Thanks!

Hi Tony,

contact me via private message, i have new switching power supplies available, located in Europe, Germany. No need to use 20 years old power supplies which will be serviced or fail anyway at some point.

Wask Audio

Thanks for the help Wask I prefer to retain it og as possible. Btw I managed to solve, all fuses need to be changed (the main one on the EL inverter board and the three on the filter board), plus the connector of the EU psu is a 5 pin molex instead of the three one of the US transformer so basically it's only a re-fit of the molex and fuses to change with correct 250v values.

Tony Fine wrote:Thanks for the help Wask I prefer to retain it og as possible. Btw I managed to solve, all fuses need to be changed (the main one on the EL inverter board and the three on the filter board), plus the connector of the EU psu is a 5 pin molex instead of the three one of the US transformer so basically it's only a re-fit of the molex and fuses to change with correct 250v values.

You should still consider a newer and more efficient, cleaner delivery switching power supply for these Akai units.

There's really no reason not to, smaller, efficient, accurate, and not expensive at all.

Plus auto compatible with 110/220