[Help] Zulu SCSI Pico Slim with MPC 3000 problems

Hi MPC fam,
i've bought a Zulu SCSI Pico Slim from Studio-Services in Germany.
its has a CD card formatted for use with MPC3000 and i can see lots of partitions on MPC3000
partitions in size 32636K is this normal? 32mb ?

issue :
ive lost 2 beats already because after saving to partition A All programs and All sequences including samples they dissapear when i turn MPC back on
There is only 1 beat that ive previously saved that is on that partition A it shows that there is 483K space left
but there was no message that there is not enough space to save my sounds when i was saving Beat that ive lost.. normally on MPC u should see a message not enough space ..
i can see MPC saving files in a progress bar text to Partition A though.. but they age gone after restart.

what am i doing wrong.. i am confused
thanks in advance for any ideas guys
peace
Jazz

I don‘t have a Zuluscsi yet but i assume the safest thing to do would be saving every project / beat on a different 32MB partition.
32MB partition file size makes sense to me since the MPC3000 has 32MB RAM and you can‘t have bigger projects than that.

For Zulu handling:

Save each "project" to one of the partitions, for example project 1 to SCSI drive 1 Partition B and so on.
(i personally NEVER use the Partition A on the first SCSI drive - just a habit.

If using Vailixi 3.50 make sure to turn MULTISECTOR LEVEL OFF in the setting.

Anyone else having issues getting the Zulu SCSI Pico Slim to work on the 3000? SCSI fuse is not blown and was replaced with a resettable fuse. It worked perfectly the first couple days and now I can’t figure out why it isn’t being recognized. Opened it up and checked all cable connections and everything appears to be fine. I followed all instructions that came with the Zulu as well. Any suggestions are welcome as I’m a bit frustrated ATM.