MPC Live III (3.7) 5pin din MIDI input completely broken...

Masi wrote:Doen't happen to me with a KeyStep connected with DIN to my MPC One running 3.7.

instrumental wrote:All MIDI input coming into the MPC as Velocity 0% (no sound) on the MIDI ports, but comes in totally fine when that same signal is coming in on USB. Checked everything several times over.

Akai said they were aware "of certain issues" regarding MIDI.

Saw one other person post about it a while ago. Am I fukking going crazy here? That's a huge problem.

Neodymium wrote:So I don't know if this is related, but I send midi from my DAW to the MPC, clock and channel info. If I don't deselect 'Zero controllers when midi stops', then it can cause all my midi to mute in the MPC, even though mutes are off.

Could something be sending 'Zero all controllers' to the MPC?

BackOnDaMPC wrote:.EDIT: I got it (5-pin din) to work on my end. My blind-a55 had the audio cables connected to the wrong ports

BackOnDaMPC wrote:Yeah, I just checked -- same issue. I will try again with USB MIDI to confirm.

Erwin wrote:

BackOnDaMPC wrote:Yeah, I just checked -- same issue. I will try again with USB MIDI to confirm.

hey! have you gotten the usb midi to work on the mpc live 3?

BackOnDaMPC wrote:quote]Yes! No issues.

Neodymium wrote:Once it's a MIDI cable, it's just midi protocol. My MPC is in standalone receiving midi on 3.6 and 3.7 just fine