Pro Tools keep shutting down HELP PLEASE

What up MPC fam,
So here is the deal. Whenever I try to run pro tools it will run fine for like 15min. It will then shut down and say it is initializing on the digi 002 screen. IT will then restart and run for like 2 mor minutes and repeat the same process. It just keeps on doing this. It doesnt matter if I am recording or simply playing something back. I am using the digi 002 w/Mac G5. Any help would be appreciated thanks.

Try checking the http://www.digidesign.com/ web for the specification
on your computer.......Pro tools is very picky.......! I don't to much about
mac's.. But im pretty sure its something simple you have to adjust on your
computer.........!

you will be better of using a pci fw card rather then the fw port on the mainboard. Digi recommends Adaptec
G5 rev1 has weird problems
002´s have problems with the powerharness. digis fault.. Most of this power problems are situated somewhere specific in the US due to weather change (im not joking!)

You can discover all this info on the DUC (Digidesign User Conference)



You can be lucky and have a robust 002 - G5 combo. Or you can have bad luck

Anyway, good luck to you