installing 8 outs board in an mpc2000

hi...sorry if this a dumb newbie question thats been asked a hundred times before!
what i need to know is how easy is it to install the 8 outs yourself in an mpc2000....or am i likely to need some help doing this?
thanks!

Read the manual to see where it goes, open 'er up and put it in (Easy like sunday morning).

Then check to see if it recognizes the FX, Hold (Shift) and number (7) you'll get the Mixer page.

Then Hit (F3) for FXSend, if the board isn't installed correctly you will not be able to do this.

If you can, you're good to go.

Pe@Ce

benjamin hatton wrote:hi...sorry if this a dumb newbie question thats been asked a hundred times before!
what i need to know is how easy is it to install the 8 outs yourself in an mpc2000....or am i likely to need some help doing this?
thanks!

yo benji, here is a link from someone who has the manual of the board and how to install it in a mpc 2000.

http://www.mpc-forums.com/viewtopic.php?p=264789#264789

after looking at the instructions, it seems pretty straight forward and easy.

go to page 6 (that's the english version)

thanks to both of you!